LX Forums Forum banner

Beats Subwoofer Speaker harness

19K views 28 replies 10 participants last post by  redsleeper  
#1 ·
Here's the back story. I'll be upgrading my subwoofer in my Durango & Charger @ the end of the summer. I don't want to cut the harness in any way. I contacted Metra looking for an adaptor to plug into where the factory Beats Sub is & they said that they have no plans to make them. The hunt was on. I sourced the connectors & terminals & built some. I left about 8in of wire for connections, you can add wire & hook it to a line level converter or straight to another sub.

I have confirmed they work on my 14 Charger R/T with the Beats, 15 Durango R/T with Beats, & 11-14 Durango with Alpine.

I have already sold a few to some fellow Durango owners & have 6 left.
Price $23 shipped USPS to the lower 48. Sorry, but the last time I tried Canadian shipping it was a nightmare.

The 1st 2 pics are my Charger test fit, the rest are the Durango test fit.

Image

Image

Image

Image

Image

Image
 
Discussion starter · #11 · (Edited)
There is no remote turn on. As far as roll off, it's the factory signal to the sub. If there is one in the OE software, then yes. If not, then no.
 
Discussion starter · #20 ·
I'd like to know how to properly wire the LOC to the harness. Any info would be appreciated.
Unplug your factory sub, connect the pigtail, connect those 4 wires to your line level converter. Black are "-" blue & green are "+", it's a mono signal so there is no left or right.
 
You have insufficient privileges to reply here.