[warchants]

Sorry for waking this thread up

 

[warchants]

So I got the entire brembo upgrade for a good deal but not to sure about my stock wheels, they are the srt design 12 spoke. Has anyone actually used these on this swap? I compared these to the chrome clads and I have allot more clearance behind the spokes on these. Trying to plan ahead, if I need spacers I want to order them as soon as possible my install window is short. I searched the forums for a couple days and couldnt find any answers for this specific wheel. I know I could just wait and the try a dry fit but Im hoping someone could save me a couple days waiting if I do need spacers.
The offset is 24 and its an 8".
Thanks. First post.
Even better, if someone has a wheel off this weekend could grab a tape measure and give me a measurement from the hub face to high spot on the brembo front and the rough radius to the bottom of the caliper that would be amazing......thought Id ask.

 

[Crownroyal79]

I doubt those wheels will clear without a thick wheel spacer.

12-14 srt brake setup will bolt onto a 2013 rt as long as you change the knuckles, hubs, rotors, calipers, pads and flex lines from the srt

So if I've read the part numbers right and this post, as long as you have everything from the 06-14 donor car knuckles, spindles, everything then they could be put on a 2015 car. Is that correct?