[SKULLBOY]

Just out of curiosity, why were they only able to get the 246 tq out of the S/C on your car? You should have gotten more since the S/C is suppose to give you more lower end. (I'm not trying to piss you off or anything). When I had mine dyno tuned with the Diablo, the were able to squeeze 239.9 with just my intake (Big Bully Intake:mrgreen and my R/T exhaust. I would have assumed you would be much closer to 300 for the tq.

Centrifigal S/Cs are more for Middle/Top end......they do not do much down low.........

Also remember,dyno numbers are debatable.........Some dynos read higher then others..........different brands of dynos will give different results......some dynos are "loaded", and some aren't........The Dyno I was on at Carb-Conn is a loaded dyno that puts a load on the wheels...... Plus my wheels don't help with true HP/TQ numbers...........

 

[65standard]

the filter looks really small and shouded. no intercooler?

 

[TTMR]

Meth would be chemical intercooling no?

 

[SKULLBOY]

No Intercooler......Using Water-Meth Injection.............drops intake air temps raround 100 degrees.......

 

[Bryali]

No Intercooler......Using Water-Meth Injection.............drops intake air temps raround 100 degrees.......

Meth would be chemical intercooling no?

And we have a winner!! Well, 2 winners actually, lol.

 

[ToddStone]

You know, I didn't realize you had 20's on your car. That makes a lot more sense now.

 

[Magnum375 Jr]

Skullboy, if you are serious about a swap, and building up your own stroker, you oughta buy Flex's motor and tranny for 1500 bucks. Would be well worth the investment I think.

 

[SKULLBOY]

Skullboy, if you are serious about a swap, and building up your own stroker, you oughta buy Flex's motor and tranny for 1500 bucks. Would be well worth the investment I think.

If Xmas wasn't peaking around the corner, and I wasn't looking at going back to school for a trade, I'd be all over it.........but for the time being, all large purchases/projects are in a holding pattern.........

 

[Bama_Magnum]

We have been getting a lot of emails with questions regarding our 3.5 Supercharger Kit. Here is some info in response.

The numbers represented below are from stock with our kit. The kit does not yet have Long tube headers, so you can imagine the power it would put down. We will put up new numbers once we have the Long tubes set up.

The cost of kit is
$5299.99
w/ Meth injection add $400.00
for a polished unit add $300

Power increases you can expect:
Stock about 180RWHP
With kit about 300RWHP
Kit with meth injection about 320rwhp

Now available is our Full kit which includes:
V-3 Vortech S -Trim Head unit in your choice of 8 PSI, 10 PSI, Or H.O. with details coming on PSI output.

Modern Muscle Designed and CNC cut Mounting Brackets

Mounting hardware

All required Tubing and hoses with T-Bolt Clamps

Vortech/Bosch bypass valve

New Serpentine Belt

Vortech SRT4 Mapsensor adapter kit with Modern Muscle extention

K&N washable Air Filter

Pro-Charger Coolant Overflow Tank

Diablosport Predator Handheld tuner with Modern Muscle Base tune

Fuel Injectors

Hello all, I know this is YEARS late asking. I picked up my 07 Magnum 3.5L SXT a few years back, and am at the point of wanting to do a few things to it., one being a supercharger, but being 2022 Im finding there are no actual kits anymore, Powerdyne, Tidalwave and whiplash are no longer around, but Im sure I can still put something together in the 5 to 7 psi range, the main issue Im having is all the mounting hardware plates and brackets. I have sent emails to the companies that are still in business about any left over parts, I got pretty much the same answer from all. "we dont do that engine anymore".

any help would be greatly appreciated.

thanks ahead of time !

 

[Aram_507]

Hello all, I know this is YEARS late asking. I picked up my 07 Magnum 3.5L SXT a few years back, and am at the point of wanting to do a few things to it., one being a supercharger, but being 2022 Im finding there are no actual kits anymore, Powerdyne, Tidalwave and whiplash are no longer around, but Im sure I can still put something together in the 5 to 7 psi range, the main issue Im having is all the mounting hardware plates and brackets. I have sent emails to the companies that are still in business about any left over parts, I got pretty much the same answer from all. "we dont do that engine anymore".

any help would be greatly appreciated.

thanks ahead of time !

Hello. Can you tell me please where did you buy mounting bracket for 3.5?

 

[Bama_Magnum]

Hello. Can you tell me please where did you buy mounting bracket for 3.5?

I have not.. thats what IM looking for, piecing together all the other parts would not be hard, the hard part is finding all the mounting brackets and plates. I cant find them. probably going to have to get something custom made.