LX Forums Forum banner

LCD in Stock headrests....

1193 Views 7 Replies 5 Participants Last post by  Lost815
Has any one done this? I am grafting some 8" raw LCD's into stock head rests and I can't figure out how to run the cable so it is hidden, it appears that the shafts on the DCX headrests are solid...

any pictures? ideas?
1 - 2 of 8 Posts
If you want to try and use the stock headrests, you will not be able to run the cable through the pole. You will have to run the cable next to the pole and see the wire.

I would just buy a set of headrests with LCD's already installed and you don't have to cut up the factory ones.

Just my 2 cents
I wouldn't want to cut another hole in the seat just for the cable not to be seen. What if you want to remove the LCD for some strange reason. You are going to have that extra hole for no reason.

Just my thoughts...
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.