LX Forums Forum banner

Have a bagging question????

2674 Views 7 Replies 4 Participants Last post by  402 Motoring
Hey guys,

We are building a 99 Expediton 4x4 and want to bag it. Do you have anything for me? I know the torsion bars are probably going to be the problem but, what if we changed over the front suspension to the 03 style? That was the first year for a coil over style suspension.

1 - 4 of 8 Posts
Is this your product?


If it is why can't this be adapted to the 99 suspension?
I am aware of that but if I change out the frame section to an 03 config I could use those correct?
What is the owner looking to get out of bagging it? Get it low or lay out? I would buy a 2wd frame and driveshaft, bag the 2wd frame and then swap out the 4x4 one.
Well I am the owner and right now I have something like 10" of space between the top of the tire and the fender. A 2wd frame is hard to come by here in the northeast, so I'm thinking about putting an 03 frame under it.
1 - 4 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.