LX Forums Forum banner
1 - 20 of 39 Posts

· Supporting Vendor
Joined
·
112 Posts
Discussion Starter · #1 ·
We are currently looking for a CHARGER PILOT vehicle in California. Preferably Riverside County. The PILOT vehicle will receive a FREE kit in exchange for modeling and test fitting of the new Charger parts. If anyone is interested, please contact me at 949-842-6662 ASAP.

Thank you again,

Susana
 

· Supporting Vendor
Joined
·
112 Posts
Discussion Starter · #3 ·
Thank you. Actually, yes, if there is a California Magnum owner willing to do the same, the offer still stands. FOr now our PILOT vehicle is in Michigan, but we could always use one in California as well.
 

· Do work!
Joined
·
1,328 Posts
I've got a magnum for you. I've been used by K&N, Eibach and Spintech...might as well use me some more...lol. Let me know the details...when, where how long etc...if you are interested.

Bill
 

· Supporting Vendor
Joined
·
112 Posts
Discussion Starter · #6 ·
bigdaddyoc said:
I've got a magnum for you. I've been used by K&N, Eibach and Spintech...might as well use me some more...lol. Let me know the details...when, where how long etc...if you are interested.

Bill
Bill, so sorry, you must not have seen this thread http://www.lxforums.com/board/showthread.php?t=39423

We have found a PILOT for the Magnum this morning. If for some reason things don't pan out, I'll be sure to let you know. I'm sure I've seen your hot ride somewhere in OC. We would never "use" you, just have some "fun". :)
 

· LX Padiwan
Joined
·
721 Posts
what are you looking to test out? sorry if you already posted it. mine is a 06 srt charger in silver fully loaded. oh yeah I am in san diego just fyi.
 

· Premium Member
Joined
·
66 Posts
sdcarguy said:
what are you looking to test out? sorry if you already posted it. mine is a 06 srt charger in silver fully loaded. oh yeah I am in san diego just fyi.
We are looking for a PILOT vehicle to use as the modeling and test fitting of the new CHARGER ground effects.
We would need the vehicle for approx. 4-6 weeks. San Diego is fine also.
 

· LX Padiwan
Joined
·
721 Posts
I would be curious as to what it looks like before i can commit to being without my baby for 4-6 weeks ;)
 

· Supporting Vendor
Joined
·
112 Posts
Discussion Starter · #10 ·
sdcarguy said:
I would be curious as to what it looks like before i can commit to being without my baby for 4-6 weeks ;)
Totally understood, unfortunately we only have the renderings complete for the front and sides which you can see in the picture. Len, the designer, has the vision for the rear and the spoilers. It is faster for him to build it off the car then actually making the rendering. If you want to discuss this further to get an idea as to where his head is, please call us at 949-842-2284 or PM us your info and we will contact you a little later today. No worries.
 

· Itchin' for mods again!
Joined
·
1,378 Posts
No Michigan Charger needed? I know one guy that would do this is a heartbeat. I would but I have the Xenon kit on already.
 

· J to da Weezy..Baby!!
Joined
·
4,238 Posts
OMG can someone please be the PILOT, i would do it because i have not drove my charger in about a month now.

BUT I LIVE IN VIRGINA...they are located in CALI. If they wanna pay for shipping they can do that. I doubt it tho.

But I need a new front end. Not driving my charger till it is replaced.

ONLY AED can help me...I believe in them, RacerBetty is a VERY VERY VERY nice lady very good people skills if anyone is thinking about it, you should call her, I am sure they could find someway to work with you.

I love there front end. My front end needs replacing because some very small damage.

-Justin
 

· Whoohooo!
Joined
·
920 Posts
Hmm... Tried calling your numbers.... PCS telephone number temporarily not in service. I have an R/T Road&Track . . . 113 miles on it though. . . I live in Cerritos.

Is the body kit Urethane or Fiberglass? I'm guessing Fiberglass.
Did you delete the fog lights? Or are you planning on replacing them with another type?

And I'd like to check out your facility before I would leave the car if you don't mind. But I would be willing to leave my car for some R&D work. I'll try calling you again tomorrow.
 

· LX Padiwan
Joined
·
721 Posts
I sent my info in a PM never heard anything...
 

· J to da Weezy..Baby!!
Joined
·
4,238 Posts
Spiffywerks said:
Hmm... Tried calling your numbers.... PCS telephone number temporarily not in service. I have an R/T Road&Track . . . 113 miles on it though. . . I live in Cerritos.

Is the body kit Urethane or Fiberglass? I'm guessing Fiberglass.
Did you delete the fog lights? Or are you planning on replacing them with another type?

And I'd like to check out your facility before I would leave the car if you don't mind. But I would be willing to leave my car for some R&D work. I'll try calling you again tomorrow.
I dont think it is fiberglass if you go on their site it tells you. Thats just what I think.

If anyone of you have any comments I think you all should call she has a very smoothing voice to listen to...lol...im jk...

-Justin
 

· Supporting Vendor
Joined
·
112 Posts
Discussion Starter · #17 ·
Jweezy said:
I dont think it is fiberglass if you go on their site it tells you. Thats just what I think.

If anyone of you have any comments I think you all should call she has a very smoothing voice to listen to...lol...im jk...

-Justin
Thanks Justin! You are pretty cool to talk to yourself! :) I've spoken to John and will be in touch with him again later today to see if he is interested.

As for the parts, they would be made of a high temperature epoxy, at least the first 10 orders including the PILOT vehicle. Feel free to call and ask any questions you can think of. We are VERY excited to get these new items out in the market! Can't wait to dress someone up in some new clothes! :rock: You too JWeezy!
 

· Supporting Vendor
Joined
·
112 Posts
Discussion Starter · #18 ·
We have spoken to a few Charger owners and just waiting to hear back from them to see if it is a "go". If anyone else is still interested, feel free to contact us at 949-842-6662 or 949-842-2284.
 

· Whoohooo!
Joined
·
920 Posts
I dropped off my Charger tonight. Leonard and Susana are really nice people. He's got a nice little setup... and I saw the 300C. muhaha. Looking good. He's still gotta finish the back end though. I'm pretty excited and happy to be working with them and helping them out with this project. I can't wait until this is going to be done. It's going to look so badass.
:banana:

Leonard said he should have the initial body work of the new bumper done by next week. At least to where it starts looking like the design he put up.

Long drive though. About a 100 miles from me... and he lives in the middle of no where! haha. But looks good and they are real nice. Looking forward to seeing the Charger again at the end of the month!
 

· LX Padiwan
Joined
·
721 Posts
congrats on getting picked...I offered up my Silver srt still with dealer tags on it but Leonad said he wanted something brighter like yellow or red. It should look great when they finish!
 
1 - 20 of 39 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top