LX Forums Forum banner

6.1 Cam install

13290 Views 18 Replies 10 Participants Last post by  Super T
Hey guys. I havent posted much on here, but Im going to be doing a cam only install pretty soon for my winter project. I found a pretty good wright up on here, what im wondering is how many of you, used magnets to hold the lifters back when doing it? How did you keep the magnet from falling down the hole also? Im going to be doing the SRT Max cam. Thank you for any help
1 - 1 of 19 Posts
be really careful if you do the cam without anything to hold the lifters......I know alot of guys have done it ......but I also know alot of guys that spun the cam only to have the lifters slide back down.If one does drop you will be pulling the motor.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.