LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 182 Results
  1. DiabloSport Inc
    We are seeking a local (CFL) Durango Hellcat for some dyno testing. We'll baseline it, load the tune, run it again, and give it back :) We'll need it at the office for a full day or 2. In return, we'll tune the truck for you and set you up with the tuner, etc. We have loaners available if...
  2. 300C, Magnum RT & Charger RT (5.7L V8)
    Hey guys I'm doing some upgrades to my 5.7 1. 5.7 ported heads (upgraded valve springs and pushrods) 2. FRI Littleboy Cam 3. JBA Shorty exhaust manifold I also bought a diablo tuner and was wondering if anyone has a diablo tune for the littleboy cam. I do plan on getting a dyno tune but...
  3. General LX Discussion (3rd Gen - 2015+)
    So the title isn't what it may seem to some. Not asking if I can just straight up throw a cam in and run the car normally without a tune. I'm wondering if it will even run at all without stalling, like enough to function on a stock tune to potentially pass a Smog test, more specifically. I saw...
  4. Great Lakes Region
    I am wanting to cam the 09 6.1 challenger, I am afraid if I find the time to do it it will drag on for 2 months from the limited time I have on the weekend. Shops are quoting LABOR ONLY around $3000-3125 for cam, long tubes and a dyno tune. Id rather help someone out that needs it, Anyone out...
  5. Tuning and Performance Programming
    Developed blow by from tube connected to air box. Noticed oily film around connection at intake, then pulled tube from filter housing and seen the blow by, never noticed any before. Catch can seemed to have more oil than usual. <Had some smoke out of tail pipe on boost. >...
  6. DiabloSport Inc
    I got a Trinity 2 EX Platinum to replace my Predator. I have a CMR tune from the Predator. How do I convert? Is it okay to attach the Trinity 2 and do some tune changes without converting tune? Will that corrupt the Predator tune?
  7. The SRT-8 (6.1L and 6.4L V8)
    Has anyone else had an issue with P2098/96 triggering MIL but only when using tuner? It only happens when I put the 91 tune in. If I put the stick tune in no codes. Thanks for the help.
  8. Scat Packages & Performance
    Have any of you that installed long tube headers discovered that the your car picked up a false knock signal which retards timing, and thus restricts power? I'd like to install long tubes and run a before and after dyno to monitor the amount of torque and horsepower that they increased. I had...
  9. Power Adders
    No power goals in mind, stock bottom end. Talked to Greg at HHP for a quote on billet 400 pump, procharger d1, 80 pound injectors. I'm awaiting his response about a few questions but thought I'd get on here and hopefully create a worthy conversation that could enlighten me on a few things. 1)...
  10. Charger Discussion (1st Gen - 2006 to 2010)
    I was recently rear-ended in my 2006 300C Heritage Edition and it was deemed a total loss by the insurance company. I've been looking to replace it with an 06-10 300/Charger/Jeep SRT8 and of the ones I've seen, many times the current owner doesn't know the full extent of the mods that have been...
  11. DiabloSport Inc
    I have a 2008 Magnum R/T, an Intune i3, and the canned 91 octane tune flashed to it. I have the 176 degree Duralast 4127 thermostat and have adjusted the fan settings accordingly. I find myself constantly getting the P0128 CEL for the engine not warming up quickly enough. Other threads have...
  12. Challenger Discussion (2015 + )
    So i have a 2018 T/A 392 with a Unlocked PCM, bypass, and engine and trans tune from Hemifever. About 2 weeks ago i went to start my car after work and it wouldnt start not even turn over. Volts were good Fuel Pump came on every thing. But on the dash it was saying:Service ShifterBlind spot...
  13. Transmissions Gears & Diffs
    So, the eForce for my 09 cop car should be here any day now. If what i've reasearched is true, I should end up around ~475 HP and ~ 450 ft.lb at the wheels, with a good tune at 6-7 PSI and the long tubes. The car will have very limited track time. It'll be mostly for terrorizing the kids in...
  14. Great Lakes Region
    Looking for recs in the Southern Wisconsin, North/Central Illinois, Northwest Indiana or Southeast Michigan to tune my 09 5.7 Hemi cop car when I'm finished getting the eForce installed. TIA
  15. DiabloSport Inc
    My wife has lost my Predator while cleaning the garage. I have a custom tune in it and the stock tune. I MAY have the stock tune saved to my computer... Now....how do I resolve. If I buy another Predator or I3 Platinum, how do I get the stock tune? I ASSUME I can pull the custom tune out with...
  16. Charger Discussion (3rd Gen - 2015 +)
    I just pulled the trigger on the Diablo Trinity 2 & ECU, so what's your opinion on the Diablo T2 & Hemifever tune.
  17. Challenger Discussion (2008 to 2014)
    Hi all. I recently purchased a 2009 Challenger that was engine swapped with a 2006 5.7. It is currently not running. I understand the 2009 should be a VVT engine, and the 2006 is not. I am assuming the reason it will not run is because of this. Is there a pcm flash I could do to get the non...
  18. Challenger Discussion (2015 + )
    So recently got my HemiFever tune and trans tune and updated my tazer today and car went from shifting at 6500 back to stock shift points rebooting the tazer and all didnt help going to unmarry and see if that works. Updates to follow
  19. 300 General Discussion (1st Gen - 2005 to 2010)
    2009 300 3.5. My scanner says all is well. It had the broken recirc door and code when I got it, but that's fixed now. Everything else is solid. Is it possible to easily tune out the delay in the drive by wire throttle? I don't want to buy a tuner and learn to use it for this particular...
  20. The SRT-8 (6.1L and 6.4L V8)
    OK c'mon for a 6.4 the only way to get a realistic return on money for HP is to go with a blower. I know there are alot of 6.4 owners that want to the power but from what i have experienced unless you can do the work yourself its just not worth it. A shop here in TX quoted me around 4500 to...
1-20 of 182 Results
Top