LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. General LX Discussion (1st Gen - 2005 to 2010)
    2010 300, I am going to be replacing the lower hinge. Just wondering if anyone has done this WITHOUT removing the door or the front fender? It looks like it can be done, but I am worried about the alignment afterwards. It's a tight fit and trying to make adjustments after wards would be a pain...
  2. AWD
    When I pull out of the driveway, I hear/feel a growl on tight turns in forward or reverse. A search suggested the transfer case might have a problem. Have any of you had this problem and fixed it?
  3. Magnum General Discussion (2005 - 2008)
    What year/model outside folding mirrors fit a Magnum? I have non folding mirrors and my passenger mirror is floppy and I’d prefer folding mirrors since I park in a tight garage? I’m I able to bolt on 2009 and newer or do I have to use 2005-2008?
  4. Magnum General Discussion (2005 - 2008)
    Hey guys, I just had to put my rear wiper back on, because the “plug” I had in there rotted away and fell out. My problem, question, The 2 tabs that hook into the upper panel broke off the lower panel, it “seems” to be tight up against the upper panel, but, looks like it might rattle, I need an...
  5. Tires, Wheels and Suspension
    My 07 charger r/t feels loose when changing lanes. primarily on the right side. checked all the upper control arms and all is tight and bushings look good. outer bolt for lower control seems tight as well. the 2 things that I am down to is inner lower control arm bushing or cradle mounts...
  6. General LX Discussion (1st Gen - 2005 to 2010)
    well I accidentally hit my tunnel brace under my car on a driveway and damaged it. I was able to get it off of the exhaust but it's bent. I attempted to take it off so I can straighten it and the first it I tried to loosen was too tight and I broke the stud. I checked the others and they are...
1-6 of 6 Results