LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 174 Results
  1. Magnum General Discussion (2005 - 2008)
    Hey, been combing the internet for a few hours now trying to find some nice coilovers for my awd 2005 R/T. The AWD part seems to be the problem but also why I bought the car. Would like to do a whole suspension kit eventually as well. Trying to avoid fab work. Also want adjustable hight and...
  2. General LX Discussion (1st Gen - 2005 to 2010)
    Hello, is there anywhere I can find the Super Track Pack Stage 2 Suspension Kit - Mopar (P5155435AD). I have had no luck in locating one. I was told a new part number was supposed to replace this one back in November but again no luck. I am open to an alternative but similar kit so suggestions...
  3. 300 General Discussion (2nd Gen - 2011 to 2014)
    Gentlemen, I have ordered the following parts: 1. Eibach anti-roll front sway bar Part# 2895.31 (35mm) 2. Eibach (pro kit) Springs Part# 28101-140 (less drop than sport line) from Summit Racing for their reasonable international shipping rates ($350) Preparing for the install, I am reading...
  4. Newbie Check-In
    Purchased my first LX chassis car last month; 2012 Challenger R/T Classic. Looking forward to sorting out the rear suspension (surprise, wheel hops like a frog) then upping the power next year.
  5. 300C, Magnum RT & Charger RT (5.7L V8)
    Hello, I recently replaced the failed cooling fans on my Magnum R/T The fans will come on when the car reaches a little over half on the temp gauge as it should but, they don't come on when the AC is turned on. I have replaced the relays already thinking that may be the issue. With the fans not...
  6. Magnum General Discussion (2005 - 2008)
    I have to rebuild the front suspension on my 2005 Magnum R/T and I'm looking for some suggestion on parts, sellers, brands, etc. Should I buy all new parts or should I just do the bushings on everything? Hit me with the 411, guys! :mrgreen:
  7. 300 General Discussion (2nd Gen - 2011 to 2014)
    To the experts on suspension: The topic: We all so familiar with the piles of parts replaced "too often" on front suspension. I wonder what it takes to modify the 300s suspension? 1. Better quality parts than stock. 2. Better handling, solid ride on cornering etc. 3. Wider rear tires? The...
  8. Charger Discussion (1st Gen - 2006 to 2010)
    How big of an 18" tire have you put on your Charger without any strut or suspension mods?
  9. Charger Discussion (3rd Gen - 2015 +)
    Finally got around to upgrading the suspension and drivetrain in this thing. Mods are: Whiteline Cradle bushings. AAD upper control and railing arms Petty/Progress Technologies sway bars DSS 4" Aluminum Driveshaft Per4mance Development Race Brace and upgraded rear diff brace Just need to get...
  10. Parts for Sale
    Looking to buy an Airlift 3p kit for my 2016 scat pack charger. If you have one for sale, lmk how much your asking, the condition, and the parts to the kit. I’ve seen lots pop up on here for around the $2,000 range so I’d like to stay around there. I’m located in Houston Tx.
  11. 300 General Discussion (3rd Gen - 2015 + )
    I have a 2019 S with the performance suspension, but from what I’ve read it’s basically the touring suspension. I’d like to upgrade to the SRT springs. I’ve seen the super track pack option but I don’t want to lower the car. Does anyone have part numbers for 2015 (last year they made SRT here...
  12. Tires, Wheels and Suspension
    I just replaced my right front lower control arm (one piece AWD) Now I have a suspension squeak, more like a grunt. Mostly occurs coming to a stop or starting from a stop. I did tighten the bolts with weight on the suspension. Spray them? Ignore it? Turn up the stereo?
  13. Tires, Wheels and Suspension
    There is a suspension lift kit for LX donks that uses extended spindles and goes for roughly $1500 us. It uses spacers and cups, too, and changes some of the drive train geometry along with the suspension... HOW HARD WOULD IT BE TO DO A BODY LIFT INSTEAD? Is there too much stuff attached to the...
  14. General LX Discussion (1st Gen - 2005 to 2010)
    Hey everyone, I'm getting ready to do a suspension overhaul and was wondering about the rear suspension bushings. My car is at 295K and I figure there would be some wear and tear. Everything in the rear of the car has been there since I bought it new (yes, surprisingly everything). Should I...
  15. Charger Discussion (3rd Gen - 2015 +)
    I'm debating between a standard body Scat Pack with the Dynamics Package and Adaptive Suspension vs. a Widebody Scat Pack.On paper, they seem similar in that they both get the 6-piston Brembos, flat bottom steering wheel, adaptive suspension, and wider tires (albeit 275's vs. 305's). I know the...
  16. Charger Discussion (2nd Gen - 2011 to 2014)
    I have been digging for a couple hours and can't seem to find any solid information about what the differences are between the suspension option packages on this generation charger. I have the "sport" suspension, and would like to purchase softer springs...but without knowing the spring rate I...
  17. Charger Discussion (2nd Gen - 2011 to 2014)
    Hello everyone, I have a 2014 R/T Anniversary Edition that I picked up about 4 months ago. According to my build sheet, the car has the "sport" suspension, but I can't find anywhere what that actually means. I love many things about the car, but the ride quality really isn't one of them. It's...
  18. Tires, Wheels and Suspension
    2013 Charger SE 105k 20inch Scat Pack Wheea B6 shocks Eibach springs I started hearing this clunk sound from the front end a while back. I found the tension struts were ripped so we replaced. The clunk went away for about 5 thousand miles then came back. So I decided to replace the entire front...
  19. Challenger Hellcat (2015 + )
    Add strong lift points and extra rigidity to your 2008-newer Challenger with bolt-on Chassis Jacking Rails (CJR110) from BMR Suspension. Jacking the car on the pinch welds can easily damage the pinch welds and floor pans, eventually causing panel misalignment. Built from heavy-duty 1 x 2-inch...
  20. Challenger Discussion (2015 + )
    Add strong lift points and extra rigidity to your 2008-newer Challenger with bolt-on Chassis Jacking Rails (CJR110) from BMR Suspension. Jacking the car on the pinch welds can easily damage the pinch welds and floor pans, eventually causing panel misalignment. Built from heavy-duty 1 x 2-inch...
1-20 of 174 Results
Top