LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 74 Results
  1. Charger Hellcat (2015 +)
    Where can I get a shop manual “I prefer the book but understand if I can only get a CD” for my 2019 Charger. I would like in addition Chilton or Haynes manual I can’t find either on their website. Maybe they don’t have this year yet? Nonetheless if I could get the shop manuals things would be a...
  2. Magnum General Discussion (2005 - 2008)
    So just joined the forum even though I have owned my 05 Magnum RT for over 4 years. I am the second owner. Its my daily and I drive it year round, even in the salty northeast winters. I love the wagon body style and would buy a new car, but there aren't really any affordable wagon options...
  3. The Gas Tank (93 Octane)
    Tesla small block V8 Swap
  4. Northwest Region
    Looking for recommendations on a good shop in the PNW to do an engine swap on my '05 Magnum RT - my other plans fell through, and I'd like to get my ride back on the road. A shop in the greater Seattle area is preferred (eastside, ideally... :)), but I can trailer it anywhere in the PNW if...
  5. Charger Discussion (3rd Gen - 2015 +)
    Can anyone recommend a good machine shop in the Louisville area? My 6.4 ate a #2 lifter and cam lobe
  6. California
    Anyone know of a good (small preferred) Independant Shop in SoCal Inland Empire area ? (Ontario CA area).
  7. Transmissions Gears & Diffs
    I'm doing a Getrag (3.91 2014 Challenger) swap on my 2008 300C SRT8 this spring and need to find a shop in the Buffalo NY area to do the work. I would prefer a shop experienced with getrag swaps on 1st gen Mopars and I've collected all the parts needed. I don't want to get gouged on labor costs...
  8. Texas
    Can anyone recommend a good suspension and alignment shop in Austin or surrounding area? I need to get some SPC camber bushings installed in the rear and everything realigned. Thank you.
  9. 300C, Magnum RT & Charger RT (5.7L V8)
    I'm going to start releasing some videos on the G3s , it'll be what I've learned over the last few years, I'll be posting videos on Assembly, cam timing , Oiling tricks, different stroker combos, from the tried and true 392 based 5.7s to the wild 433ci based 5.7s ETC , Next year some Dyno...
  10. General LX Discussion (1st Gen - 2005 to 2010)
    Hi everyone. Long time reader and usually find what I can by searching the forums. I just had 255/55 R18 Falken Ziex ZE950 A/S tires put on the stock chrome-clads, and naturally asked the shop to do an alignment. Turns out both lower balljoints and one outer tie-rod needed replacing (I...
  11. 300C, Magnum RT & Charger RT (5.7L V8)
    My engine build is in my signature. I initially had the car with 5.7's oem butterfly deleted catback adapted to fit the SRT8 manifold, mids and cat. After changing the to a Magnaflow clone which is unfortunately 3" as the magnaflow, there was a noticeable loss in power. Not a mind thing...
  12. Charger Discussion (1st Gen - 2006 to 2010)
    So, did a front brake job on my 2010 AWD Charger R/T. Noticed the front tires are wearing on the outside. Bring it to the shop our company uses to maintain our vans for an alignment, oil change and tire rotation. He finds the front dead on, but the back is way out of alignment. I ask him if that...
  13. Northwest Region
    I need to find a high quality shop to weld cutouts onto my '07 MSRT exhaust system. I don't mind paying top dollar for a great quality job, trying to avoid having a butcher work on my baby. Trying to find someone who takes pride in the job they do is NOT very easy nowadays. I'm looking for a...
  14. Automotive Electronics (Audio & Video)
    I splurged on a no weeds electric cutouts kit and had a local shop install it rather than try to do it myself. Procharged 2005 300c. NOWEEDS - NOWEEDS The kit sounds great and seems to seal tight enough there's no leaks when closed which was important to me (past electric cutout kits from...
  15. Newbie Check-In
    My brother has had a 2006 (TOP BANANA) Daytona for about 10 yrs. I enjoyed it so I recently pulled #0547 out of a salvage yard to rebuild. Most of the front end needed replaced, and after posting on another forum, it was suggested that I stay with the stock look instead of putting on a SRT8...
  16. Southeast Region
    Any recommendations? I also need a good tint shop
  17. The SRT-8 (6.1L and 6.4L V8)
    Any help or suggestions on a decent shop manual to assist me with my engine and manual trans build will be greatly appreciated. Looking for torques sequences, VVT camshaft specifics etc. Thanks in advance. JIM
  18. Texas
    Does anyone know of a good shop around the san antonio area that could do a mid muffler delete on an 18 6.4 scatpack?
  19. Magnum General Discussion (2005 - 2008)
    Hi Guys, I'm replacing the starter in my Magnum RT AWD and bought what was claimed to be the correct starter for my car on Amazon, then brought it to the shop to have it installed. The problem is you have to drop the steering rack just to get at the starter and see what's in there; I had no...
  20. Speedlogix
    It's that time of year again ... and our sales are under way! Make sure you shop now because some of these sales are so good, the inventory won't last long! aFe 10% Off 11/19 - 11/28 Shop -> aFe Coupon code: AFE-BF18 DiabloSport 20% Off MSRP 11/15 - 12/31 Shop -> DiabloSport Prices marked -...
1-20 of 74 Results