LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Transmissions Gears & Diffs
    Looks like I'll be pulling the Ding's valve body out, getting 3-4 flare and trying to tune it out isn't working. Going to change Conductor plate when it's out. Any particular brand or are they all the same?
  2. Magnum General Discussion (2005 - 2008)
    Just picked up an 06 MSRT8 that has never had a front mount and my state requires a front plate. Does anyone know the part number for the front license plate bracket? Is it the same part # as the lower models? Or what else are you using instead?
  3. Magnum General Discussion (2005 - 2008)
    My mechanic found that the lower radiator hose was leaking while my car was in for an oil change and Winter tire swap. I had no idea. Even though the car has been sitting for days at a time in the garage during the pandemic, there wasn't a drop of coolant on the floor. It has all collected in...
  4. Transmissions Gears & Diffs
    I’ve been shopping for a transmission, both used & new. My 2006 took a crap with 82k. I’m running across listings that go up to 2010 or 2011 & up. Is the plug in different for the conductor plate? Thanks
  5. Magnum General Discussion (2005 - 2008)
    Hello All, Hate to add another post about these AC compressor's but I'm just looking for some outside input, Has anyone had issues with these rubber seals on the front plate melting?
  6. Transmissions Gears & Diffs
    Hello LX family, I have a few questions that i'm sure has been posted too many times on here and i apologize in advance, I did my best to go through the library of posts and didn't see anything after a few hours of sorting through all the posts... So i need to replace my conductor plate and my...
  7. Transmissions Gears & Diffs
    Hey LX Family, Have a quick question... I need to fix an issue with my 05 Maggy and all issues and codes point to the speed sensors in the transmission conductor plate and i have no concerns with anything being replaced except for the 6 different solenoids! I didn't want to drop the Pan, Valve...
  8. 300C, Magnum RT & Charger RT (5.7L V8)
    I've been running the stock pre-eagle intake on my car as long as I've had it. The problem is I needed more power, and to be more specific, because I use an awful amount of nitrous, I needed something that would help me build more power into the future, and take some abuse. I...
  9. Charger Discussion (3rd Gen - 2015 +)
    Anyone with the disadvantage of having to put a front plate on that also has the tech group, how did you do it. I would rather not use the mount that came with car, would like to use some sort of relocation bracket. Anyone have one that works with the tech group.. Do not want to just leave it...
  10. Charger Discussion (3rd Gen - 2015 +)
    Hey Charger family, I noted that the bottom of the license frame digs into the clearcoat of the rear bumper pretty fast. Here is my cheap fix for that, and is great for cars with bumping stereos! Hope you find it useful, cheers. :mrgreen:
  11. General LX Discussion (1st Gen - 2005 to 2010)
    Morning all, Started having an issue lately, with the transmission getting stuck in a gear. Got codes "P2784-INPUT SPEED SENSOR 1/2 CORRELATION" the first 2 times this happened, each a week apart, last being sunday night, then this morning the issue happened again but p2784 grayed out and i got...
  12. Canada Corner
    Oem 6.1 flex plate out of an 07 jeep srt $60 Billet technology catch can with Diablo logo engraved, no mount. $80
  13. Magnum General Discussion (2005 - 2008)
    Hi Guys, I've been dealing with the infamous transmission shudder that happens when doing tight turns at slow speeds, especially noticeable when reversing. The shudder has gotten worse now that the temperatures are going up, it wasn't so bad during the winter here. I researched this at length...
  14. Transmissions Gears & Diffs
    I'm attempting to replace my conductor plate in my 05 Mag RT. After removing the electrical wires and loosening the 7mm bolt in the center of the plastic housing, turning it enough that it should have been loosened a dozen times, the plastic housing will not come out. I can't pull it out by...
  15. Charger Discussion (3rd Gen - 2015 +)
    Looking at nitrous express and nitrous outlet plate systems so far, looking for input on these and others. Basicly looking for reliabilty and performance gains from people who have used them
  16. Superchargers
    He all, i believe i mentioned this before, but i cannot find the post. I have a spare m112 supercharger sitting in my garage that has an adapter plate for a gm 3.8 II and was going to remove that and put on my 2006 SRT. Does anyone know where i can find the adapter plate to make it fit. Also...
  17. General LX Discussion (1st Gen - 2005 to 2010)
    I bought a new conductor plate for my 05MagRT from rockauto. It was supposed to be the Dorman brand. After receiving it and looking if over, it does not have Dorman marked on the part. It has Mercedes Benz molded into the plastic in two places. Sooo, this makes me think that Dorman is making...
  18. Magnum General Discussion (2005 - 2008)
    My state requires a front plate so I got the correct bracket for my '08 Magnum RT (P/N 04805955AA) I've read the instructions and diagram and I can't see how it fits. Anybody have a close up pic of the bracket installed or have any tips?
  19. Charger Discussion (3rd Gen - 2015 +)
    So I have had my '15 Scat Pack now for over two and a half years. And for most of her life, I've REFUSED to put a front license plate on. From the moment I custom ordered it from the dealership (back then, there was no such thing as buying one of these off the lots, as they had just come out)...
  20. 300C, Magnum RT & Charger RT (5.7L V8)
    Anyone know the size for the throttle body bolts on an 06 RT? Im taking off my nitrous plate and I lost the original bolts.
1-20 of 31 Results