LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Parts for Sale
    Hello I am looking for the sloped plastic covers that are mounted on top of the actual roof rack mounting posts at the four corners. Does anyone have them please?
  2. 300C, Magnum RT & Charger RT (5.7L V8)
    I picked up another '10 Pursuit that has a loud clacking (beyond a tick) a lot of the time but not always. There was full disclosure by seller so I got good price at auction. I've always loved the '10 Pursuit most and found them to be most reliable (this one is high miles and engine hours). I...
  3. 2nd Gen V6 Forum (3.6L Pentastar)
    Man, you guys got it rough. As my friend says, "please stop changing what works!" Apparently some of the Pentastar V6's have a plastic oil filter housing, and Dorman has engineered an aluminum replacement for it. While I don't hold Dorman in high regard for quality, this does appear to be an...
  4. General LX Discussion (1st Gen - 2005 to 2010)
    So I haven’t posted here in a while but recently my 2006 Dodge Magnums passenger side bezel fell victim to the plastic tabs breaking off and now the vent doesn’t stay on my dash. Does anyone here have a DIY fix for that. I don’t have the little tabs. Any ideas would be greatly appreciated as I...
  5. 300 General Discussion (1st Gen - 2005 to 2010)
    Or at least a diagram on a Mopar site where I can find it? Can't find it anywhere. This must've gotten caught on something and sucker split in half. It fits up surrounding the rear jacking point, held on by two 10mm nuts up front, and two plastic push nut/grommet things in the rear fender well.
  6. Magnum General Discussion (2005 - 2008)
    The left headlight is a bit wobbly. I thought it was a broken tab, but there is a small bulb shaped pin on the rear outer edge that fits into a hole in sheet metal. The hole has a plastic retainer to grip the pin. The plastic retainer part is broken, and I don't even know what it's called...
  7. SCAT Chat
    Does anyone know the part number for the black plastic Charger badge that sits near the hood latch and above the radiator? This is for a 2016 Charger Scat Pack.
  8. Detailing / Car Care
    I can't find any part number for this underbody plastic piece that connects to the fender liner.[url=https://photos.app.goo.gl/SCvC3RrtCiRydnEf7] [url=https://photos.app.goo.gl/4ZsRm7mwS2EdSnav7] [url=https://photos.app.goo.gl/DWhe1Y6aM8DxcKW88]
  9. General LX Discussion (1st Gen - 2005 to 2010)
    Noticed the 1st Gen 300s have body color rockers but every 1st gen charger I see has only the basic black plastic ones. Is it possible to take the rockers from the 300 and put them on a charger? Or are they different in fitment? Does the charger have an option for painted rockers that I could...
  10. Charger Discussion (3rd Gen - 2015 +)
    installed the ones in the back and it was super easy but I cannot reuse factory retainers in the front in the middle. The instruction mentions zl1 supplied retainers but I got none. When I reached them via email they told me: The lower push pin is not needed as we found with our updated rock...
  11. Magnum General Discussion (2005 - 2008)
    My 05' AWD R/T AWD has 138K miles and is A+ mechanically. The body however is not. 8 golf ball dents, front plastic facia backed into by numerous idiots and is cracked. Front spoiler gone and old repair to right rear quarter (plastic) starting to crack. It's also red and although always...
  12. Engine / Intake / Exhaust / Performance
    I have a 2015 challenger 6.4L with a ProCharger. I was just given an a brand new in the box aluminum intake of a 6.1L. Could I swap this out for the plastic intake? Anyone done this? Could I get some pics please.
  13. Want to Buy
    I've been searching in vain for a set of these vents or hatches or whatever they're called, for a 2005 Magnum. I assume all Magnums would be the same for this part. It's the plastic vent or grille part that you pop off on the rear interior sides to be able to unscrew the taillights. I absolutely...
  14. Magnum General Discussion (2005 - 2008)
    Hey guys. I need either a part name or part number. It is the plastic piece that bolts to the bottom rear of the front fascia. The piece that comes out of oil changes sits behind it. Coming home on the interstate it ripped out on one side. As it sits now, only two threaded inserts and the 3...
  15. General LX Discussion (1st Gen - 2005 to 2010)
    Good afternoon, have been working on my seat and have an issue I just cant seem to figure out. This morning, while moving the drivers seat all the way forward to get behind it easier, it jammed on a piece of plastic I had on the carpet, this was not something that was part of the seat. It...
  16. Power Adders
    Do anybody have one or is it a big difference from what I have. Is it just a upgrade from the plastic one
  17. Transmissions Gears & Diffs
    I'm attempting to replace my conductor plate in my 05 Mag RT. After removing the electrical wires and loosening the 7mm bolt in the center of the plastic housing, turning it enough that it should have been loosened a dozen times, the plastic housing will not come out. I can't pull it out by...
  18. Scat Pack Community
    I have a pitch black 2018 scatpack charger. I desperately want to remove the chrome Dodge on the rear brake light panel. Only chrome on the car besides the 392 Hemi emblem edges which doesn't bother me as much. I already debadged the R/T with the 3M and cleaning wax which worked really well...
  19. The Gas Tank (93 Octane)
    I had to replace my garage door opener today with a 2018 model (well a new one). Bottom line, my Homelink is no longer compatible with the opener. But my wife's 2010 Lexus Homelink is. I've been obsoleted. My poor Maggie. Relegated to caveman status. Gotta use one of them prehistoric...
  20. Magnum General Discussion (2005 - 2008)
    I would love to see pictures if anyone has improved the Magnum plastic interior with another material so it doesn't look so cheap.
1-20 of 26 Results