LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 213 Results
  1. Charger Discussion (1st Gen - 2006 to 2010)
    I own a 6.1L 2007 hemi charger and recently I've been having issues with my oil pressure I changed the oil with mobil 1 synthetic and a mopar filter this January and haven't had any issues until Monday when the pressure started dropping on startup as I went to work, when I got out of work the...
  2. General LX Discussion (3rd Gen - 2015+)
    No this is not a What's the best oil" thread. It is about availability and cost. It seems the cost of 0W-40 Oil has increased by as much as 25% depending on the quantity and size. Does anyone by it by the quart anymore? I stopped years ago and went to 5 quart jugs. I use to get them at Walmart...
  3. 300 General Discussion (1st Gen - 2005 to 2010)
    Mine was fine when I got it at 60k. Oil changes every 3k-4k since then. A few changes back it started using a lot of oil, not leaking. The last 2k it used next to none. Input? Background. Change before last I replaced the PCV hoping it was inhaling the oil based on the intake being very...
  4. Magnum General Discussion (2005 - 2008)
    Anyone have one? Is Magnum oil pan same as charger or challenger? Thx
  5. General LX Discussion (1st Gen - 2005 to 2010)
    Went to pick up a couple oil filters. The mopar and the mobil 1 filter. However there is a big difference inside the thread area. Anybody know why these of so different? Mopar is the bottom one.
  6. 300C, Magnum RT & Charger RT (5.7L V8)
    I picked up another '10 Pursuit that has a loud clacking (beyond a tick) a lot of the time but not always. There was full disclosure by seller so I got good price at auction. I've always loved the '10 Pursuit most and found them to be most reliable (this one is high miles and engine hours). I...
  7. Charger Discussion (1st Gen - 2006 to 2010)
    Are the 2010 3.5 engines pretty reliable? From what I gathered: * PVC design isn't the greatest, needs to be cleaned and checked every oil change to make sure it's flowing right. Change if necessary. *3000k oil changes, synthetic. Due to the poor PVC design. *Rocker arm assembly needs...
  8. 2nd Gen V6 Forum (3.6L Pentastar)
    Man, you guys got it rough. As my friend says, "please stop changing what works!" Apparently some of the Pentastar V6's have a plastic oil filter housing, and Dorman has engineered an aluminum replacement for it. While I don't hold Dorman in high regard for quality, this does appear to be an...
  9. AWD
    Dodge Magnum AWD transmission oil pan and transfer case cooling fins are wet of oil. Is that hole suppose to be there? If so, why its leaking oil? Bad bushing, bearing etc? Oil dont smell anything, color is brownish...
  10. The Gas Tank (93 Octane)
    This 'Backdoor Fuel Saving Device' Will Be Taken Off The Market Next Week
  11. General LX Discussion (1st Gen - 2005 to 2010)
    Posting for a friend not on forums, higher mileage (150k+) 2006 6.1 leaking oil badly at rear of engine in an area that implies rear main seal, but want to hear others ideas about where it could be coming from. It's running back on crossmember and trans pan, splattering a little on the cat's...
  12. Vendor Deals
    Have you thought about what to get your "Do-It-Yourselfer" dad? Here are a few ideas from the RockAuto catalog! Maintenance Parts: Get him the Oil and Filters he needs to change the oil in his daily driver, motorcycle or lawn mower. Throw in the Gear Oil he needs for the ATV as well. (Find the...
  13. General LX Discussion (1st Gen - 2005 to 2010)
    I searched but couldn't find same as what I've been dealing with. In 2019 my 06 Magnum began random stalling, usually when coming to a stop or accelerating from a dead stop. My shop and dealer couldn't figure it out. The only thing that we noticed as a commonality was that the oil light would...
  14. Charger Discussion (3rd Gen - 2015 +)
    While changing the oil today I managed to lose one of the front c clips, must have dislodged it while putting pan back in place. How do you get to these things once they fall into the frame?
  15. 300C, Magnum RT & Charger RT (5.7L V8)
    Curious how long these engines last with synthetic oil changes on schedule and non-modified internals and running mds? 250,000+ miles?
  16. Superchargers
    This has probably been discussed before but I figured I would see if anyone has any insight. I have had a nagging oil leak on my 6.1 the past couple of years and honestly I originally thought it was the rear seal so I was just living with it. I dont drive the car a ton so it's been more of just...
  17. 300C, Magnum RT & Charger RT (5.7L V8)
    So this is how my weekend starts, eh?! sigh...!?!?! :roll:
  18. 300 General Discussion (1st Gen - 2005 to 2010)
    I'm having a bit of an issue. After installing my intake manifold after some porting and powdercoating, im having an excessive amount of air and oil being blown out of the breather port next to the oil fill tube. I took the breather off and had someone rev the engine and I noticing an alarming...
  19. Charger Discussion (3rd Gen - 2015 +)
    I looked all over for a solution to my problem but could not find any so far. Is it just me or maybe not? I can barely see the oil level scale that's imprinted on the oil dip stick. I have a 2017 Scat Pack Charger with a 392. I have tried to search for a aftermarket dip stick but could not find...
  20. 300C, Magnum RT & Charger RT (5.7L V8)
    Figured I would share. 2011 Former GSP Charger Pursuit. Purchased 113K, Lifter/Cam failure 117K, Currently sitting at 157K (miles). The first sample is seen far right with Iron being 38PPM. Second sample was after cam repair (finally second cam install was 125K thanks to enginetech lifters)...
1-20 of 213 Results
Top