LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Want to Buy
    Looking for something to put on my MSRT8. Its a forged 413 with 8.5:1 compression. Whats for sale?
  2. Tires, Wheels and Suspension
    Across platforms. How many vehicles use this rear caliper? Looking for two to get powder coated for my 300.
  3. The SRT-8 (6.1L and 6.4L V8)
    street strippers looking for different look and performance 426 stroked out 6.4-- higher rpm cam looking for knowledge on Ritter intake are they hard to tune currently running ported 6.1 looking at Edlebrocks low profile 90 elbow and taller Ritter any thoughts on performance and tuning????
  4. Want to Buy
    Hey there fellow LXers, I thought I would check here and ask, as I know there have been a great deal of Vossen CV3 wheels sold over the years for the LX platform. I am looking for a set of 4 in 22 inch not overly concerned about condition of finish as I can and will get them powder coated in...
  5. Want to Buy
    Hello, looking to purchase upgraded DSS or G Force axles for my 08 Chrysler 300 SRT-8....If you have a set your looking to sell, please message me.
  6. Want to Buy
    looking for a unaltered wiring harness for a 06 srt8 300. mine got chewed in a couple spots by mice so just want to replace it. must be in good shape with nothing altered. anybody have something or can point me in the right direction?
  7. Superchargers
    Looking for a good place to make a 2.5" pulley for my Gen 5 3.0. Don't know when Whipple will come thru.
  8. Newbie Check-In
    Newbie here checking in from Colorado. I drive a 2019 Chrysler 300s AWD. I have already found lots of useful info on these forums, and am looking forward to contributing where I can. I work in car audio/electronics, and have some experience with general mechanical work as well.
  9. Newbie Check-In
    Hello. Im a Chevy guy that wants to defect to the Mopar scene. I have had 3 Chevy trucks and a 2014 Dodge Dart GT(which was a fun little car). I drive a 2016 Chevy Silverado crew cab now but been looking into Ram trucks for awhile now. But then while at work I ran into a guy that had a Charger...
  10. Want to Buy
    I am in search of an exhaust system for my 2008 300c 5.7. Preferably looking for a corsa extreme system, but would consider other brands!
  11. Newbie Check-In
    Checking in with my 2005 Magnum RT that I have had for 4 years. I was recently thinking of getting a new car, but being a dad with little kids, the Magnum wagon is the perfect size vehicle. So sinking some money into it now to get some rust repaired, the roof and liftgate repainted as the...
  12. 300 General Discussion (1st Gen - 2005 to 2010)
    So I got word back from the shop the crank and block are both ok after the big drink of water. Due to the shortage of parts I'm limited on what's available to get the engine back in operation. Not looking for anything more than a forged bottom end (makes no sense to go anything less) with a...
  13. Charger Discussion (3rd Gen - 2015 +)
    Yes I have been looking for a pic of a "Factory" 2018 Scat Pack grill. The upper grill. Looking to see the black plastic shape on the grill where the badge attaches. If you have a pic please post. Thanks in advance.
  14. Tuning and Performance Programming
    Hi to everyone on here. I don't have an lx but I am looking for a tuner and not having much luck on the truck forums. I have a 2004 Ram 1500 with a 392 (6.1 block) and 8HP70. The trans is running with its own standalone and is tuned already, but I installed a Holley Terminator X system for...
  15. Newbie Check-In
    Can't find my orig post, then again I'm not sure I did it right back then so here it goes. Between family health issues & a complete change in my work schedule; everything was put on hold, until now. Looking for 3.5l build tips/parts/info a 400WHP twin turbo engine build, which is plenty for...
  16. At the Dragstrip
    Anyone been racing at Bristol? Looking to get a baseline off of my wifes Daytona before it gets a driveline transplant. We're in Lafayette TN, and looking for closer tracks for her to do some test and tune, and maybe for fun Sportman class. She's never staged a car, and her dad held the 1/8...
  17. Engine / Intake / Exhaust / Performance
    Return or no return system Is return really needed? looking for 800 or more to wheels when done 300S has a small fuel line 4XX stroker current eng is coming out Getting ID 1050X injectors Will get a Whipple Gen 5 3.0 when released Looking at water/meth inj. Will not run E85 Which...
  18. Want to Buy
    Looking for a set of 3.73 gears for a 6.1 hemi axles as well looking for a 09 and up
  19. Charger Discussion (1st Gen - 2006 to 2010)
    Need to replace the radiator in my '07 Daytona. I've followed this subject for years, always toyed with the idea of upgrading in the past but gave up because of the cost of OEM and the confusion surrounding most of the aftermarket units. Now that it's gotta be done, I'd like to go with a...
  20. Canada Corner
    Looking to purchase a set of 20" SRT rims for 2008 Chrysler 300.
1-20 of 500 Results