Search Results for ‘lines’

dup delete

Envy the guys that can put videos together, I can barely get pics. Used rivnuts in floor pan on every other bracket to hold lines. Had to shim tank down in back for hose clearance. Drilled holes to run lines up to eng bay. Next is the engine bay when motor and supercharger are...

I have a leak under the air cleaner. Does anyone make prebent brake lines? I have bent my own in the past.

Hey guys, i'm looking for a set of stainless steel brake lines for my 19' charger scatpack. After fighting with braking issues with the 4 pot brembos at the track all year, i've pulled the trigger and have some 6 pot brembos on the way. Figured i'd do the lines while everything is off...

Anyone got a line on a set of stainless lines for an 07 tona?

hey all, so i have a daytona 392 so 6 pot brembos front 4 pot rears. wondering if there would be any benefit to upgrading to braided brake lines from stoptech or goodridge im assuming the OE lines are pretty stout but just curious. also looking at the manual OE fluid looks to be DOT 3 fluid...

I had a line rupture today on my way home from work, a bit of a scary moment, tried to time the traffic lights all the way home after getting off the highway. Anyways, does anyone know the diameter of the hard steel brake lines for 05 Magnum RT RWD? These factory replacement parts have been...

Looking to confirm or reject whether front and rear spindles off a 2014 SRT Super Bee will fit on a 2017 R/T I got my hands on a full four brake set of 4-piston Brembos, including calipers, rotors, spindles/knuckles and lines - I understand the calipers, rotors and lines will work, and I...

Hi, I have a 2019 Charger Scat with dynamics package (Hellcat brakes) and I'm looking into swapping the brake lines over stainless steel. Can anyone confirm if these kits will fit my vehicle: Goodridge 12411 StopTech 950.63004 + 950.63502 Thanks!

Does anyone know what the diferrence in the shock stiffness rates are for the different lines (R/T, Daytona, etc.), inlcuding the Police ones?

SO i got the idea to powder coat my calipers. i pulled the lines off and brakes and capped the lines off with rubber caps. took about 2 weeks to powder coat the calipers. i put new seals in and new dust boots I DID NOT CRACK THE CALIPERS IN HALF.. i put everything back together and i can not...

i have a 09 challenger. i am sure most lx cars use the same size does anyone know what the thread pitch is on the front and rear break lines? i am going to be powder coating the calipers and new lines and want to plug ( cap ) off the old lines or at the factory metal lines until it is done so...

Hey everyone! Just a quick question as I can't seem to find exactly what I need lol. I have a 2013 Rt and looking to upgrade the fuel lines to the larger diameter 6.4/6.2 lines. The main reason being is for more efficient flow, You see these high hp builds now and days with little to nothing...

08 Charger RT Problem My metal coolant lines are leaking where they press into the water pump. So after many attempts at reseating the lines into the water pump while it's still bolted on under the intake, I am finally giving in and will pull the intake to replace the o-rings. Hopefully it...

I’m looking to buy some srt8 brake lines. Got a great deal on a full brembo swap for CHEAP and I mean CHEAP and the parts are in great condition. The person I bought them from cut the lines instead of just unscrewing them so now they are usless. I’m also pretty sure i cant use my lines. Thank you!

Anyone have pics of the back side of a 4.5 installed on motor? I know this blower sits farther forward on the manifold compared to any of the 2.9's since there is no jack shaft. Looking to see how the intercooler lines and bypass area are set up on the larger unit. Thanks

Monday afternoon, just before I got off the freeway coming home from work, one of the tranny cooling lines burst, right along the drivers side of the radiator where there is a rubber section. Man it made a big time mess spraying tranny fluid all over the serpentine belt and pulleys. I've never...

I've got a 2007 Charger SRT-8 with a Procharger 6 psi and heads/cam. I am running an AEM 50-1000 fuel pump and SRT-4 Stage 1 injectors. Johan says I probably can't go much higher in power with it. I have looked at other pump options but I have some general safety concerns about running braided...

has anybody come up with a workable solution for a line lock on the 3.5 (2005 magnum)? have discovered the slp version for the hemi but unfourtunately it is not compatible, seems the front brake lines are routed difernt, mine appear to run down the side of the strut tower, passenger side...

What is the thread size on the Whipple drag pack style intercooler for the coolant lines? Is it O-ring or NTP thread? and what size lines do they use? Some of the pics look like probably -12 or -16