LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 33 Results
  1. Turbos
    I am working on a twin turbo build. I would like to know if I should run my fuel regulator vacuum line, and pressure switch vacuum line to the purge solenoid port on my 6.1 intake. If so, do I delete the purge solenoid? Thanks in advance!
  2. General LX Discussion (1st Gen - 2005 to 2010)
    Hey all please help if u can. Got the bolt out easy. But now it won’t go in. The steering column from car needs To come down like 1/4 inch more to have bolt holes line up. i have pb blasted the ****e out of hit and still won’t go in to steering rack shaft. many ideas? Thank you
  3. General LX Discussion (1st Gen - 2005 to 2010)
    I had a line rupture today on my way home from work, a bit of a scary moment, tried to time the traffic lights all the way home after getting off the highway. Anyways, does anyone know the diameter of the hard steel brake lines for 05 Magnum RT RWD? These factory replacement parts have been...
  4. The SRT-8 (6.1L and 6.4L V8)
    Over the last several months I've been chasing several demons that have been robbing my 2006 SRT8 of performance. Purge valve and filter in the fuel tank. This was confirmed at the dealer and I'm in the queue for a new fuel tank Vacuum leak from hard lines. I replaced all the vacuum hard...
  5. Parts for Sale
    Need driver and passenger side fender liners. Bought aftermarket ones off eBay but they are so thin that they don't even line up with the fender in some areas. Figure I'd ask here in case someone is parting out a car.
  6. Vendor Aisle
    We are adding many new lines to CSPRacing.com and once of them has been Innovate Motorsports. They make a great line of widebands, gauges, and other electronics. We have added the line at a great price and anything over $100 ships free. Check our out site at the link below and if you have...
  7. General LX Discussion (1st Gen - 2005 to 2010)
    Morning all. Does anyone know what size the hard brake line is? Need to replace a section. On the way home last night, i stopped for gas and leaving the station, suddenly my brake pedal sank to the floor. in like the last inch of travel before the pedal bottomed out, i have some brakes, its...
  8. Vendor Aisle
    I will keep it simple. Borla has a very strict pricing policy that prevents us from discounting the line on our site. That does not mean however we can't give you a great deal if you call us @ 610-628-1593! From the Touring to the Atak exhausts, we have the BEST deals! Checkout our Borla line...
  9. Charger Discussion (3rd Gen - 2015 +)
    Hi All, I have a 2018 Charger RT STP and was wondering if there is a way to get Line Lock activated without having to get A Tazer....?
  10. 300C, Magnum RT & Charger RT (5.7L V8)
    So I’m in the process of replacing the cam due to a failed lifer and I need some help on the timing. I’ve seen it posted that the single mark goes on the cam and the double goes on the crank and vice versa. Now my problem is my buddy was over helping and before I lined the timing marks up to...
  11. General LX Discussion (1st Gen - 2005 to 2010)
  12. Newbie Check-In
    Happy to be here. 2017 Dodge Charger Hellcat. Black with Brass Monkey wheels. Drop me a line if your in Middle TN! Always looking to meet new peoples and talk cars.
  13. The SRT-8 (6.1L and 6.4L V8)
    Hi...wondering if anyone can help me...I bought this cam from this thread Hhp stage 2 cam for sale 90 mm Tb But he didnt supply cam card, I was going to install this weekend and dont know the Lobe seperation or the intake center line to install at? Maybe someone who has used this cam has a...
  14. General LX Discussion (3rd Gen - 2015+)
    Just checking to see how wide spread this issue is. Since I got my 18 Scat Pack with only 2 miles on it, its had a tinny metallic rattle that starts at 2000 RPM and diminishes at around 3000 RPM under light to moderate throttle. I got under the car today and noticed the fuel line heatshield...
  15. BCLX
    I experienced the valve seat dropping problem and now I either need a used, new or rebuilt engine. The shop where my car is currently at (Jim's Automotive in Langley) has found a used 5.7 with 130K km's that I'm second in line for. Does anyone here know of a used 5.7 for sale? Or, does anyone...
  16. Charger Discussion (1st Gen - 2006 to 2010)
    I have a Leaking Schrader Valve on the suction line of my AC after I added a little gas...... This is in a bad spot for using a "no evacuation" valve replacement tool. It’s not leaking "too bad" so I just put the cap back on and hope it holds a charge for this weeks heat wave. Has anyone had...
  17. 3.5L V6 Forum
    has anybody come up with a workable solution for a line lock on the 3.5 (2005 magnum)? have discovered the slp version for the hemi but unfourtunately it is not compatible, seems the front brake lines are routed difernt, mine appear to run down the side of the strut tower, passenger side...
1-17 of 33 Results