LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Engine / Intake / Exhaust / Performance
    COMP Cams Evolution OE-Style No Link Bar Hydraulic Roller Lifters for Dodge Gen III HEMI 5.7L/6.1L/6.2L/6.4L Engines - Set of 16
  2. Knowledge Base Submissions
    Gen 3 Hemi Camshaft Failure Mystery Explained! - YouTube ,
  3. The SRT-8 (6.1L and 6.4L V8)
    So, as I stated in my previous posts, I'm in the process of replacing my cam and lifters (3 failed set of lifters) that have PREMATURELY failed!!! Anyway, I've been trying to get the cam out for last couple of days thinking I'm a completely incompetent idiot because I couldn't get the cam out...
  4. Want to Buy
    Hey guys, the guy who rebuilt my bottom end says the MDS Solenoids and Lifters should be changed on my motor. Does anyone have some laying around? Even better if your relatively close to Miami, FL (3 Hour Drive?) and I can come pick them up. Rebuilding the engione now and want to have the parts...
  5. Want to Buy
    Going with the TSP Stage 4 boosted cam 226/235 582/582 117 +4 Need Phase limiter .040 Cometic head gaskets ARP head bolts 8 Mopar Replacement Lifters 05038784AD with trays let me know with prices shipped to 33441 Thanks
  6. Want to Buy
    Whos got the best prices? early 5.7 block: Timing chain kit and non mds lifters. Also need whole engine gasket kit and cam, rod, main bearings.
  7. General LX Discussion (3rd Gen - 2015+)
    Hey guys so ive been having a ticking noise when driving at slow speeds and once i uninstalled my tazer the sound is 95% gone. Does the tazer have any influence on these lifters or oil delivery/pressure? I didnt think it did but now im not so sure.
  8. Want to Buy
    Hey all I'm looking for some Hellcat lifters, let me know! :)
  9. 300C, Magnum RT & Charger RT (5.7L V8)
    Am I over-thinking this? I'm going to have the heads off my 5.7 because I have a set of updated heads (new seats and springs already installed) waiting to go on. While I have the heads off, I'm planning to swap in an OEM 6.1 cam. I can see a new adjustable timing set along with the new chain...
  10. High Horse Performance, Inc.
    We're kicking off March Madness early with another SALE! Starting today until 3/20, we have our HHP Limiter Cam Package on sale. No coupon code required! Just add the kit to your cart with the parts you need and see the savings at the checkout screen on HHPRacing.com Interested in adding...
  11. General LX Discussion (1st Gen - 2005 to 2010)
    What all would be necessary when swapping a 6.1L Camshaft into a 5.7L Hemi Block. Right now I'm thinking I would need 6.1 lifters, pushrods, and an MDS delete kit. Is there anything else to think about when doing this swap?
  12. 300C, Magnum RT & Charger RT (5.7L V8)
    So I cannot for the life of me figure out why my lifters in my 2014 Charger Pursuit 5.7 are only noisy in this scenario! Drive the car for quite awhile and get it up to operating temperature. Say for example I drive it for an hour in the Florida Summer heat. Then, I park it for five hours, then...
  13. Engine / Intake / Exhaust / Performance
    Is it possible to swap the cams on a 2006 5.7L hemi without pulling the heads?? I thought I read an article somewhere where they clocked the cam to push the lifters up then removed the cam out the front like usual. Anybody have any input??
  14. 300C, Magnum RT & Charger RT (5.7L V8)
    Hey all, recently had major work done to my charger. Had a cam shaft lifter failure. Looks like 2 whiped cam lobes and another 2 were on the way, so a total of 4 failed lifters. Did all new lifters, new 6.4 cam, oil pump, pick up tube, push rods, valve springs, some new valves, valve guide...
  15. 300C, Magnum RT & Charger RT (5.7L V8)
    Ok guys, I have a few questions for the veterans who have made some mods. I bought a 2011 Charger with a snapped timing chain. I am in the process of rebuilding the engine but with a few upgrades: Modern Muscle Extreme Cam, springs and push-rods, Phaser limiter Non-MDS lifters (bought 6.4L...
  16. Parts for Sale
    Hey guys, Im on the hunt again for 6.1 lifters, so I can do the MDS delete. Im also looking for a 6 speed manual fly wheel and possible a clutch if yall have one thats in not bad shape at all. Thanks everyone!
  17. Power Adders
    Tried searching and calling MMX a couple of times, but I'm not getting anywhere. Thinking about buying the MMX Supercharger Cam since my engine is apart. I have a full set of hellcat lifters coming already to replace the MDS lifters. The description on the website says no springs are needed...
  18. Magnum General Discussion (2005 - 2008)
    Got an MDS delete kit with two sets of lifters, two yokes for the lifters, and 4 solenoid plugs. Now I noticed the non-mds lifters yokes look like the front mds-lifters (the rear mds lifter yokes have an extra tab in the middle), and the remaining brackets (yokes) seem to have larger holes, as...
  19. Magnum General Discussion (2005 - 2008)
    Can you run stock lifters with MDS plugs in if the MDS is deleted in the tune? I'm doing a rebuild on my 5.7 and the solenoids ALL broke coming out (there's 128k on the clock..) and since the MDS can be disabled in the tune, what are the benefits to getting non-MDS lifters or will I be just...
  20. 300C, Magnum RT & Charger RT (5.7L V8)
    I have a reman Mopar 5.7L engine that I believe has MDS lifters in it [centers had holes in them] and MDS plugs in the block. [It also has a Comp cam and 6.1L pushrods]. I am just getting the car on the road and it seems to make no power, nothing like it should. I am concerned that the MDS...
1-20 of 30 Results
Top