LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 68 Results
  1. Canada Corner
    I'm doing an eagle head swap on my 06 Magnum, found most of the parts so far used for great prices. I'm still looking for an eagle intake manifold and valve covers. I'm getting an frp cam and mds delete if anyone has any parts related to this job let me know, id rather not pay a few hundred...
  2. General LX Discussion (1st Gen - 2005 to 2010)
    Other than the Camshaft, Push Rods, Valve Springs what else is needed? My car currently has a blown engine (it’s a Pre-Eagle) and I’m either going to swap a Pre-Eagle Crate or an Eagle Crate. What would be needed other than rods and springs on both the pre eagle and eagle. I see different...
  3. General LX Discussion (1st Gen - 2005 to 2010)
    I’m looking to swap a VVT Eagle Engine into my 2006 Chrysler 300C. My engine is trash and the car has just been sitting for a while and it’s time to put a motor in. If I wanted to put an Eagle Motor in what additional parts would be needed to make the car start? If I don’t do the Eagle swap I...
  4. Parts for Sale
    Selling off the last of my parts from my LX. This is a top end from a 2013 Challenger. I think they had around 35-40k miles on it when I bought them. This is for a set of Heads (with valves and springs installed), valve covers, and the full intake manifold. I'm willing to split them up, but...
    $650 USD
  5. 300C, Magnum RT & Charger RT (5.7L V8)
    I know there must be some differences between the 03-08 5.7 pistons and the 09+ (Eagle) pistons to handle the smaller cylinder head chamber volume in the Eagle motors but I can't find definitive information anywhere. The rods are the same from 03 - current so the pistons must be different. Does...
  6. 300C, Magnum RT & Charger RT (5.7L V8)
    I have a 08 pre eagle 5.7 and I've got a set of 6.1 heads I'm going to put on with a comp stage 2 hrt cam and putting the comp beehive springs on the heads and I've ordered the the comp non mds lifters already. I also have a eagle intake already. Just wondering what push rods to get and...
  7. The SRT-8 (6.1L and 6.4L V8)
    I'm thinking about putting a 6.1 into my 06 Maggie R/T AWD. American racing makes headers for the eagle headed AWD cars. Are the eagle heads the same port dimensions and bolt pattern as the 6.1 heads? If so I was just going to use the AWD headers for the eagle heads from them. Thanks!
  8. Engine / Intake / Exhaust / Performance
    Bought these long tubes for really cheap from some person . I saw the egr port and figured they were good for my 07 rt. I have a heads and cam package from Stu and this was all that I was missing for now. But I noticed it was a D port a little too late. Anybody have any experience with results...
  9. Charger Discussion (1st Gen - 2006 to 2010)
    Hey guys! Just wondering if anybody had any results from installing a 6.4 intake on a heads/cam 5.7. I have a spartan plus cam with inertia performance heads, and I have a chance to get a 6.4 intake. The only problem i see is that people say it’s pointless if I still have pre eagle heads... any...
  10. 300C, Magnum RT & Charger RT (5.7L V8)
    Eagle exhaust manifolds are the same as the 6.1 so even with the slight port mismatch, they are an improvement over my stock, correct? My plan is to use stock eagle manifolds then eagle JBA catless mids on my magnum.
  11. Tires, Wheels and Suspension
    '17 Charger SP now with 25K miles. Original owner did weird stuff. In the span of the 3K miles he owned that car he had the OE tires removed, had Conti DWS06s installed, had them removed and bought Nitto 555G2s in 275/35/20 which are the wrong size for the car. The Nittos became noisy and were...
  12. 300C, Magnum RT & Charger RT (5.7L V8)
    I'm hoping someone has already done this combo and can share their knowledge with me. I have an 06 5.7 that I will be putting eagle heads on and a 6.1 camshaft in. Which pushrods should I use, please? I'm also going to install eagle intake manifold, eagle valve covers, 6.1 intake springs with...
  13. Newbie Check-In
    Hello all, I have been lurking awhile. Picked up a 05 300C 5 months ago from a local junkyard. Car was in great shape but lost #3 intake valve seat. This lead me on a quest to swap in an 09+ Eagle motor. I plan to post up the details on this in the next few days. Long story...
  14. AWD
    Hi, I'm trying to get a solid answer to this question. 2006 magnum rt awd with a complete eagle top end......will the eagle exhaust manifolds bolt directly to my jba awd mids?
  15. Engine / Intake / Exhaust / Performance
    What is the highest CR one can get from stock pre eagle heads on pre eagle block? I know .030 is the most milling a head can get so what does that bring the CR to? And using different gaskets, can it get brought up higher?
  16. Engine / Intake / Exhaust / Performance
    The eagle intake and injectors are virtually the same as the 6.1, correct? As far as flow numbers on the injectors, they are the same? I'm thinking, with an adapter, I could use the manifold with its fuel rail and injectors, and tune for E50.
  17. Challenger Discussion (2008 to 2014)
    First off forgive me if this question has been asked before. I've done several google searches on the topic, and can only find information on the 6.1 heads using the pre vvt (03-08) blocks, as well as several threads about Eagle heads on the pre-eagle blocks. I'm aware that the compression may...
  18. Parts for Sale
    This is a long shot but is anyone parting or selling their forged motor outright (pre eagle only)? Getting ready to build one but checking here first.
  19. Power Adders
    Like the title states what all is needed? Will I have to get eagle heads or adapters?
1-20 of 68 Results