LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 35 Results
  1. Parts for Sale
    WTB 32 Tooth 6.1 Reluctor Wheel & Bolts Please email me and I will respond asap. Thanks Rob
  2. 300C, Magnum RT & Charger RT (5.7L V8)
    New AGM battery bought in April 2021, but wasn't installed until Sept 2021. Car ran fine with new battery for nearly 2 months. Car started and then died a second later. Would crank but not start after. Charged battery with a new Shumacher fully automatic charger on the 2<>6 setting and the...
  3. Magnum General Discussion (2005 - 2008)
    I had my magnum in storage for about 2 yrs. I forgot to disconnect battery, it had discharged to 0 volts. I got the battery out of my 08 ram truck and installed into magnum. No crank....i grabbed another vehicle and hooked up jumper cables, still no crank. Lights, windows everything else...
  4. 300 General Discussion (1st Gen - 2005 to 2010)
    I'm new here. If I'm honest, I joined because I'm desperately seeking some help from someone who has been where I am with this car. The short end of my problem is I've tried 4 different brands of crankshaft position sensors, all result in codes (P0300, P0315, P0335, and/or P0339), depending on...
  5. 300 General Discussion (1st Gen - 2005 to 2010)
    First of all I am enquiring here because I am a fellow member and you guys are tops in my books. I have exhausted my efforts in another forum. The car in question is a 2006 acura csx 2.0l. No codes, things I have done to rectify. Fuel pump, injectors, coils plugs, battery, starter, intake and...
  6. Engine / Intake / Exhaust / Performance
    Are the two rotating assemblies interchangeable? I know the cam is obviously not but not sure on the crank. Does anyone know the piston CCs of both?
  7. Tuning and Performance Programming
    Hello I installed my new PCM from Flag Ship one tonight. After I made sure every thing was ok, I decided to program my car. Well that turned into one Big cluster Frack. First question isn't this tuner So posed to have a 91 and a 93 tune? I could only find the 91 octane tune. Well after doing...
  8. The SRT-8 (6.1L and 6.4L V8)
    Does anyone know for sure how many teeth on a 2009 6.1 reluctor wheel? In the process of building a 6.1 based stroker, the Manley crank came with a 32t wheel. Not sure how many teeth on on my stock 6.1 crank in my 2009 Challenger SRT8.
  9. Want to Buy
    I Spun a bearing and am now in need of a STRAIGHT 6.1 crank. I would prefer one that's straight and has good journals, but will take on that needs ONLY journal work. I have 2 6.1 crankshafts that are bent out of spec. Im in Arkansas and willing to pick up from bordering states or pay shipping...
  10. Engine / Intake / Exhaust / Performance
    Looking to expand my own knowledge on this subject, with my car going under the knife next week. I'm stroking my 2017 5.7L to a 392, with a .010 over bore and 4.00 crank. I'm clear on the machining process for the bore, but with the stock crank having been 3.578, what kind of clearance work will...
  11. 300C, Magnum RT & Charger RT (5.7L V8)
    Alright hopefully you guys on here can help me out here. Id like to prelude what im about to say by stating that ive looked and read literally hundreds of threads on different forums and still no dice. So i got a 08 300c 5.7l awd from a guy for 900 bucks. Has SLP loudmouth 1 exhaust and a diablo...
  12. Engine / Intake / Exhaust / Performance
    Hey guys, I recently purchased Forged internals and forged crank for my 5.7. I’d like to go forward with this build and try to finish it by May. I need some help. I have forged pistons, rods, and crank. I’d like to know what all is needed? Also are any of you forged 5.7 guys on stock cam? Any...
  13. 300C, Magnum RT & Charger RT (5.7L V8)
    05 magnum 5.7. I’ve got good fuel pressure to the fuel rail. The engine cranks over but will not fire or even act like its trying to fire. Could it be can or crank sensor?
  14. Engine / Intake / Exhaust / Performance
    So I have been tracing down a misfire past few weeks. Only occurs under WOT, the PCM is logging cylinder 8 misfires, pretty constant count as soon as I get under boost. I know most tuners completely disable misfire detection, which I tried to do but seems to have only worked for closed loop /...
  15. Hellcat 6.2 Supercharged HEMI
    Like it says arethe pistons, crank, and rods forged in a hellcat?
  16. General LX Discussion (1st Gen - 2005 to 2010)
    Ok, long story short, removed heads to install headers. Got everything back and the car cranked but didn't start. Turned over for a few seconds when I stepped on the gas. Battery voltage was 11.68V. Got a new one, same result. For the few seconds it ran P0300 code showed up multiple...
  17. Want to Buy
    About to supercharge my car need a crank pinning kit please and also looking for the other items in my title
  18. Engine / Intake / Exhaust / Performance
    So I've seen lots of build threads over the years all in varying degree of power out come. I'm curious to know if anyone has tried to build a Non VVT 5.7 into a stroker using the 6.4 crank? I've recently come into a 6.4 crank (which is forged from factory) and started doing some research. I've...
  19. Parts for Sale
    Hey everyone, We are looking for a 3.795 crank with 2.1 rod journals (chevy LS size) for our 6.1. If anyone has one for sale, let me know! Thanks, Nick
  20. Parts for Sale
    SOLD - 392/6.4L OEM Crankshaft Description: OEM Crank from 392 SRT8. I incorrectly purchased thinking it was for a 6.1L. I had it polished at a machine shop and they confirmed it within spec for standard bearings. A couple of teeth on the reluctor wheel are a bit scrapped (see last pic) $OLD...
    $500 USD
1-20 of 35 Results
Top