Search Results for ‘cover’

My cover on Magnum fell off somewhere and I can't get them at dealer or ebay. Or anywhere. Yeesh. Anyone have one kicking around? :caveman:

How to add front facing camera to my 2017 Chrysler 300S, Mopar parts number 68516070AA? Do I have to change rear view mirror cover? And where to connect harness, does anyone know?

I cannot handle the dust so I'm going to powerstops again I think. the website doesn't show 2021 but I believe they are the same z26-1405 or z23-1405, correct? I thought I remember the 2020 brake pads were changed and did not cover the entire rotor? not sure that matters as from the pics I...

Mine broke. The only replacement I could find was for a Charger maybe. I bought it, the cable cover is different, it doesn't fit. I cut and taped the two together for a franken-cover. Anyone got a source for a new one?

Easier if I move this convo into another post.. The 6.1 Timing guide has 4 springs instead of 2 in the 5.7, but are interchangeable. So I'll be using the 6.1's part number obviously. to do the whole job, I'm putting the parts list together.. I'm looking for a parts list before I go in and do...

It's time to knock out 1 more project & document a couple previous ones. I really didn't like the look of the Scat engine bay with that ugly coolant tank and the ABS plumbing nightmare. So, I found some covers foe both the coolant tank and ABS. The coolant tank is offered by JLT Performance...

Looking for a white bumper cover for a 2006 Charger. LMKWYG. Thanks

Been looking at options for powering a dash cam via the rear view mirror similar to the kits out there for hard wiring 12v radar detectors. I happened to come across a "SimpleUSBPort Dash Cam Power Adapter (10-pin Type D)" adapter made specifically for Chrysler vehicles on Amazon that is...

My 2013 300s' armrest has started splitting (where my elbow rests) so I have a replacement skin on order but wanting to know if anyone has done this replacement before. I know how to remove the armrest cover from the center console, but not sure how to remove the OEM cover so I can replace it...

Hi everyone, I had posted earlier about timing cover removal to fix coolant leak in my SRT8. Got the cover off and I was like might as well do a timing set since I already have it open. Now I need to remove the oil pump, removed the 4 bolts from the pump but it's not coming out. I really...

Looking for the round one that has "dodge" on the cover. Thanks

Hi everyone, I have a 2010 Charger SRT8. I need to replace the timing cover gasket because I'm having a coolant leak. Is it possible to replace it without taking the whole cover off? Reason I'm asking is because I do not have a pulley puller. And have never done a job like this before so I...

I've a 2017 300S that I bought about 8 months ago. Prior to my purchase, someone had backed into the car while it was parked. Damage wasn't serious, although it did require a little body work and a repaint on the front bumper cover. Naturally, the dealership did it as cheaply and quickly as they...

Anyone have P/N for the jump start post cover for the Magnums? I found one on amazon but it has 90 degree turn for the cable which doesn't work for the Magnum. I'd post a pic but for some reason its a no go for now. Thanks, d.

anybody has these ? do they fit with the driver under dust cover ?doing some research , thinking these or hikari ultra leds. leaning towards GTR. thank you.

the right side valve cover gasket on my 300C is weeping oil down onto the exhaust manifold and causing a burning oil smell in the cabin when at idle. It's not leaking on the ground, but I can see it's wet at the lower rear of the cover. Replacement looks pretty simple, but I thought I'd ask for...

I hit a big puddle today that I didn’t realize was as deep as it was. This caused one of the bolts to break off that holds a plastic cover on the passenger side in front of the rear wheel. I’ve only had the car for 2 months and haven’t purchased a low profile jack yet so I can’t really get...

I'm so glad this product has finally arrived in the marketplace. Most road course require that you have towhooks in case you run off in the gravel or sand. Finally, you can have that perfect install without removing the bumper cover to measure, drill - you don't even have to bolt anything down...

Ok I need some of the older members to reach back in their memory bank and help me lol. I saved these pictures a long time ago while browsing the forums does anyone remember the person/member that made this engine cover?? It's a Hemi engine cover that has been modded to fit a 3.5l. I'm wondering...

Hey there, I need to replace the cover sunroof mechanism (accordion rubber strips). I can't find any for a 2005 Magnum. I have only seen them for later models. If anyone finds some info, I would really appreciate it. Thanks in advance.