LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 227 Results
  1. General LX Discussion (1st Gen - 2005 to 2010)
    Other than the Camshaft, Push Rods, Valve Springs what else is needed? My car currently has a blown engine (it’s a Pre-Eagle) and I’m either going to swap a Pre-Eagle Crate or an Eagle Crate. What would be needed other than rods and springs on both the pre eagle and eagle. I see different...
  2. 300C, Magnum RT & Charger RT (5.7L V8)
    Is it possible and/or has anyone ever still passed smog with comp 268 cam? I’m going to be upgrading the cam eventually on my 06 5.7 hemi and wanted to know if it’s possible to pass with this cam. It’s my daily driver, I live in Cali and it’s almost impossible to do the dirty pass. So I would...
  3. 300 General Discussion (1st Gen - 2005 to 2010)
    Hey guys, pretty new here but I have a 2006 300c 5.7 that I just installed a stage 1 comp HRT cam in. I'm working on the tune with Sean from Hemifever, but after the install, my shifts have gone soft and almost slippy. Sean said he hasn't/can't change the logic on the trans on mine being a 2006...
  4. Magnum General Discussion (2005 - 2008)
    So some of us may remember the headache I went through on my Magnum getting it back running. Long story short- took a bit to rebuild it after having problems with family and the family business / shop. I changed out the engine again during covid, and had to use a block from a more recent year...
  5. Magnum General Discussion (2005 - 2008)
    Hey guys so I bought my mag a few years back as a project car. The engine was blown ( common valve drop issue). I've been working out all of the mechanical issues the car has.( more then I originally thought) It's about to go on the road and I want to upgrade the heads to avoid the valve issues...
  6. 300 General Discussion (1st Gen - 2005 to 2010)
    So I got word back from the shop the crank and block are both ok after the big drink of water. Due to the shortage of parts I'm limited on what's available to get the engine back in operation. Not looking for anything more than a forged bottom end (makes no sense to go anything less) with a...
  7. 300C, Magnum RT & Charger RT (5.7L V8)
    Hey guys I'm doing some upgrades to my 5.7 1. 5.7 ported heads (upgraded valve springs and pushrods) 2. FRI Littleboy Cam 3. JBA Shorty exhaust manifold I also bought a diablo tuner and was wondering if anyone has a diablo tune for the littleboy cam. I do plan on getting a dyno tune but...
  8. Engine / Intake / Exhaust / Performance
    Anybody know the complete eng specs? What rod, crank, piston, and cam used? Has 4.00 stroke 4.125 bore 6.125 rods
  9. 300C, Magnum RT & Charger RT (5.7L V8)
    On my second engine and it dropped a valve seat on my second hemi engine. Hoping the block is still good if it is I decided I would upgrade a few things since it will be opened up. So I'm gonna put in the little boy cam and 5.7 ported heads with upgraded valve springs and pushrods. Still...
  10. General LX Discussion (3rd Gen - 2015+)
    So the title isn't what it may seem to some. Not asking if I can just straight up throw a cam in and run the car normally without a tune. I'm wondering if it will even run at all without stalling, like enough to function on a stock tune to potentially pass a Smog test, more specifically. I saw...
  11. Parts for Sale
    Thanks folks, I have a setup coming from a forum member.
  12. 300C, Magnum RT & Charger RT (5.7L V8)
    K, disclaimers. I'm new to doing engine work this in depth so excuse my ignorance. I recently got a comp cam Valve Spring kit for my 08 Charger 5.7. I noticed the stock springs have the cages, pre eagle style as I believe they're called. Obviously the comp cam springs don't come with the cage...
  13. Engine / Intake / Exhaust / Performance
    Do they make ARP bolts/studs for rocker shafts and cam phaser?
  14. Great Lakes Region
    I am wanting to cam the 09 6.1 challenger, I am afraid if I find the time to do it it will drag on for 2 months from the limited time I have on the weekend. Shops are quoting LABOR ONLY around $3000-3125 for cam, long tubes and a dyno tune. Id rather help someone out that needs it, Anyone out...
  15. The SRT-8 (6.1L and 6.4L V8)
    Wow I'm glad I stopped drinking. Bunch of gibberish.
  16. Engine / Intake / Exhaust / Performance
    Are the two rotating assemblies interchangeable? I know the cam is obviously not but not sure on the crank. Does anyone know the piston CCs of both?
  17. Charger Discussion (3rd Gen - 2015 +)
    So I installed a dual video dash cam system in my car yesterday (Apemann 420D) and was actually impressed with how easy it was to run the wires (2018 SXT plus). Everything is working great except the rear camera. The video feed from the rear camera has super interference. Also it interferes...
  18. Engine / Intake / Exhaust / Performance
    I am doing a "junk yard" or "sloppy build" on a 5.7 I got for relatively inexpensive. The cam was wiped on several lobs I have everything to put a 6.4 cam into the motor I put the 6.4 spring i had on the shelf in the heads but I am reading conflicting information about whether or not they will...
  19. Engine / Intake / Exhaust / Performance
    Does anyone know what the difference is between the 2015-2017 and the 2018-2020 Hellcat cam? They have different part numbers but I haven't been able to find what was changed. Newer one is listed as the Demon and Red Eye replacement as well so wondering if it has bigger specs than the earlier cam.
  20. 300C, Magnum RT & Charger RT (5.7L V8)
    I am helping my son do a cam swap in his 2013 Charger R/T 5.7 VVT. A few things are different from when I put a cam in my 2007 5.7: On my non-VVT Gen1, I replaced the timing chain tensioner with 6.1 unit since the Gen 1 5.7's were known to be weak. On 2013 car it looks like 5.7 and 6.4 take...
1-20 of 227 Results
Top