LX Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 49 Results
  1. Vehicles for Sale
    2007 SRT/DESIGN Hemi , runs strong . Lots of mod,. Listed in pic . 119k miles. No trades
    $11,000 USD
  2. SCAT Chat
    I recently bought the all of the necessary stuff for the swap to brembos but was told it is off of a magnum srt8. Would the knuckles be a straight swap onto my 16 RT?
  3. Misc LX Mods
    What are the differences between the two and can the non SRT knuckles be modified to accept the Brembo calipers? Are the caliper brackets different?
  4. Parts for Sale
    Looking for a full brembo set for my 2005 magnum rt. I need the spindles with the calipers. Thanks
  5. General LX Discussion (1st Gen - 2005 to 2010)
    I've read up on the SRT8 Brembo swap, front and rear, onto the 5.7 C/RT models and I only have one question. All the write-ups I've read list all the specific parts but when it comes to the brake hoses neither the SRT or the C/RT brake hoses will work and they only recommend to try some from...
  6. Want to Buy
    looking for a set of brembo 6 piston front brakes any shape i can rebuild paint
  7. General LX Discussion (1st Gen - 2005 to 2010)
    I'm wanting to put the Brembo brakes from the SRT8 on my 2010 Chrysler 300C and was wondering what it would entail? Are parts interchangeable from Charger/Challenger/Magnum? My car is RWD and I'm looking to change front and rear.
  8. Tires, Wheels and Suspension
    Can anyone verify if these are the correct OEM parts for my rear Brembo brake pads ? More Information for MOPAR 5174327AC MOPAR 5174327AC on Rockauto.com Thanks in advance !
  9. Charger Discussion (3rd Gen - 2015 +)
    I changed my brake pads a while back and mangled a nut on the caliper. i have been wanting to replace this nut but have not been able to find it anywhere, not sure what its called so i hope you guys know what am talking about. Its on the 6 piston brembos, theirs a large bolt directly in the...
  10. Charger Discussion (3rd Gen - 2015 +)
    This would apply to 6 piston cars with the 2 piece rotors. My Daytona ticked turning on either direction. I read about the problem on here so I was far from the only one. I got my Hellcat a few months later and it ticked too on any turning. It’s embarrasing for both being brand new cars...
  11. Want to Buy
    Looking for a pair of SRT rear Knuckles Local or willing to ship to SoCal I believe all the LX rear Knuckles are the same, if not please point me in the direction of knowledge :thumbs_u: (going on a 16 Challenger)
  12. Challenger Hellcat (2015 + )
    Has anyone successfully unearthed the actual Brembo part number for the 6 piston brake rotors? In addition, has anyone figured out a cross reference for these rotors on other vehicles? There are lots of vehicles out there now with 6 piston brembo setups. I have to imagine that the rotor...
  13. Challenger Discussion (2015 + )
    Started looking for pads and rotors so I know what the bill is gonna be when it's time. I looked on a few sites claiming to be Mopar factory parts along with Rock Auto, and every part listing for the 2016 Scat Pack says (w/o Brembo)...anybody know the correct part #s for pads and rotors on the...
  14. Want to Buy
    looking to buy a complete set of spindles hubs and brembo calipers. please pm me or reply with miles and car they are off of.
  15. Tires, Wheels and Suspension
    I've got six piston calipers. They were black and now are silver. I would like to get Brembo logos back on. Where can I purchase the logo? What are the most durable? Thank you in advance,
  16. General LX Discussion (1st Gen - 2005 to 2010)
    Are the rear Brembo calipers on a 06 SRT-8 the same as the Brembo Hellcat rear calipers? Thank you in advance,
  17. Tires, Wheels and Suspension
    B6 Performance Series My 300 is lowered on Mopar stage ones and I'm doing a full Brembo upgrade. Which shocks would work for the lower ride?
  18. 300 General Discussion (3rd Gen - 2015 + )
    I wonder if the brembo front calipers of the 2014 chrysler 300 srt8 will fit my 2017 300s ?
  19. General LX Discussion (1st Gen - 2005 to 2010)
    Hey I am sure there is a thread for this somewhere but I am new to this forum and have never posted before.. that being said my brembos are in need of replacing, as far as I can understand its rather costly to replace rotors and pads at the dealer and I personally am not so keen on "wasting"...
1-20 of 49 Results
Top