Search Results for ‘bolts’

I need to replace my toe links. I don't want to lower the cradle to remove the bolts from subframe, because the bolts hit the body. Can I just cut the bolts and replace them with new ones, installing them by flipping them around? The bolts were originally installed from the front, and now I...

I'm changing the below: (2016 Challenger Hellcat)1) Stabilizer bar bushings only (4 bolts) 2) Left and right Stabilizer Bar Links (upper and lower bolts)Does anyone know the torques specs for these ?http://www.aanning.com/AJISSUES/Hellcat_sway_bar/SWAYBAR1.jpg

Does anyone have any rockers/shafts for the 2009 5.7L they want to let go off? I need a set of intake and exhaust. I also need the water pump bolts and intake bolts for a charger intake. Thanks!

Like the title says, Can anyone tell me socket size i need to remove the uppermost transmission to engine bolts? I would like to go to the pick & pull tomorrow or friday and grab a v6 converter. thanks.

I am seriously considering putting a 2015+ 6.4 with 8spd auto into my Magnum. Yes I know its a lot of work. I notice that the couplers on the GenII cars are very different than the old "Guibos", but they do appear to have 6 bolts. Do the bolts line up/are they compatible? If not, would the...

Hi all, I finally got a used subframe after a very helpful post here, and had it sand blasted and powder coated. I jacked up the front end of the car today, removed the covers under the engine, and hit all the bolts I needed to remove with WD-40 and let them sit for a few minutes before trying...

Hello. What is a good source of belly pan bolts and "clips" to fasten them? I was under the car last night and I'm missing one, and I know another one is a hack job. I'd like to replace all four.

Any tips? Almost seems like I'll need to grind down a shallow socket to get to the bolts facing the spare tire well. Even with that, just by looking at it, it seems like the bolts are longer than the space available.

I was coming home from work on the expressway the other morning and my front driveshaft broke at the differential, and looks to have cracked the front differential in the process. I got replacement parts, and I was reading the service manual on how to change everything out. It says to replace...

Hi everyone! I did some front end work to resolve some clunking and the car pulling to the right. I had to get tires a couple weeks ago and the mechanic said one tie rod was bad so that pushed me to do this sooner rather than later, as I have a tendency to procrastinate, lol. Anyway, I...

Hello all, So I was one of the lucky ones that had the pleasure of experiencing the dreaded valve seat drop in my 06 Charger R/T. Well I absolutely love this car and decided I was going to save her. I pulled the motor, stripped it down, and had the shop go 30 over on the cylinders with...

Has anyone ever had a one piece drive shaft made? Obviously there are single piece options out there, but I don't need a $1000 carbon fiber driveshaft. Let me back up a bit and explain where I'm at. Two weeks ago while making some shakedown passes at the track for my new setup, I sheared 5 of...

Purchasing long tube headers? We have a very cool opportunity for you with a NEW product! The next 10 people that purchase a set of Kooks Headers, Stainless Works Headers, or American Racing Headers can use coupon code TITAN at checkout and receive a FREE set of Titan Precious Metals Titanium...

The bolts come loose, and I mean completely loose from the Block, but I can't remove the bolt from the Intake Manifold. It's as if there is some sort of "retainer" on the underside of the Intake Manifold keeping it attached so I can't lift them out. What gives???

Ok so far I've been able to get all of the stock parts off (cats and headers) but I'm starting to have trouble with the new kooks install. I'm having a hard time getting the new ones to align to get the bolts in. The first bolts on either side of the engine (closest to front bumper) are not...

Putting a new set of heads on my '05 5.7, with new bolts. Checked the manual and found no mention about lubing the bolts when installing. Should some sort of lube be used on the threads, and clamp surface? If so, what, moly, motor oil, or something else?

OMG! Whooped my ass! Thought I could sneak the old one out passed the Solo exhaust center section....NOPE! So had to drop it too. UGH! Pulled the 8 driveshaft bolts which are T-50's and LOTS of locktite! Then 2 15mm bolts at the diff front and 2 21mm bolts at the rear. Take the front 2 15mm...

Anyone out there tear down engines for parts and have the hardware? Need the timing cover/wp and accessory hardware, could use the oil pan and whatever else. I don't need stuff like head/main bolts, exhaust manifolds, rocker arm bolts... Let me know what you got. It's for a pre eagle engine...

good morning all. been a while since ive been on here or needed any help. cars been running pretty good for a few months but now i have a question because i cant seem to figure it out myself. over the summer i bought and had installed a set of bbk shorty headers for my 05 magnum rt. i went to...

Hey all, So my son did a 3.73 getrag swap on my 07 Charger SRT8. All is good but something I noticed is if I'm giving it like half throttle and let off, it sounds like the diff is banging on the subframe. We also replaced all bushings with energy suspension bushings. Has anyone else...