Search:

Bump!

Ttt

Ttt

My car didn't come with it either but I didn't have to do any flashing. Just installed it and ran through programming to clear out old programming and then ran through programming to my garage door....

Ok this is thread going to be shut down as soon as I get home. To those of you who posted profanity, or vulgar images, I would suggest you remove it now because when I get home and I'm able to lock...

Date change! June 6, 2020 is now the date!

As mentioned, the bolt does not come all the way out. Try pulling on the plug while unscrewing the bolt.

Search Homelink. It's on here. I used the post to connect mine when my car didn't come with it.

Unless you have some information to contribute, don't join in on a thread just to bash someone else. Consider this a warning.

Here we go folks! I had a lot of people reach out offering to assist with next year's event and am very appreciative. A team has been assembled to start contacting this year's event supporters...

CAD$150
Like new take offs. From 08 Challenger SRT but could be used for other LX models. I believe spring rate is a little stiffer then some other LXs. Should lower by 0.5" - 0.75" compared to SXT...

Thanks Bob. Already running Eibach front and rear. It may just be the coil over struts and shocks are worn. Won't know until I get them off the car.

So I guess I should provide the reason behind the question. I'm currently running a set of coilovers but while they're great for height adjustment flexibility, they don't provide that great a feel...

Has anyone ever used a Bilstein SRT setup (with springs) from a Challenger on a 300SRT? If yes, any difference with respect to ride height or ride quality as compared to the proper Bilstein setup for...

Proper snows and common sense is all it takes to drive in snow. 6.1 here. I know guys who drive Hellcats in the winter up here.

In Ontario, Canada. On since mid Oct due to nail at edge of tread block and summer tires pretty worn. Snowed on Wed with more (~10cm) to come tomorrow or Monday.

Looks like this Murrillo fellow has also run afoul with the folks who organize the annual SpringFest event.

...

Getting ready to put her to work tomorrowhttps://uploads.tapatalk-cdn.com/20191025/74486665491404cfdcb43c01372d1694.jpg

Not sure about that yet. It seems there are a lot of moving parts here. It does look like he is silently removing himself from admin exposure on certain sites and FB pages. He also deletes posts on...

Thanks Bob! I'll see if I can pick a set of these up. I've tried 2 different wiper arm mount styles but neither was satisfactory. I'll give it one more shot before I try a cowl mount unit.

Do you remember the vehicle make/model that you pulled from?

Thanks Dan, I've tried 2 models of clip ons and spray pattern isn't that hot. Any chance you remember the specific ones you bought?

Simon, your link opens up to a page with a whole bunch of nozzles - was this the intention or did you have a specific one to recommend?

Looking for ideas to mount a washer nozzle into the windshield cowl of an 06 300. I have a TruFiber hood and don't want to drill into it. I'm currently using nozzles that mount directly to the wiper...

I think only in Challenger.