PDA

View Full Version : The Evil Twins! 428" HellCat Strokers Inside...



DemonPerformance
01-18-2017, 10:13 AM
Just thought I'd share these pretty pieces with you guys. One is accounted for, the other is up for grabs to the first person that wants it! Throw some goods worked heads/studs into the mix and really crank that 4.5L Whipple up! That's what we'll be doing with one of them :mrgreen:The guts of these motors can handle 2000HP and then some.

Demon/TKM 428 HellCat Stroker
Custom Spec'd Diamond Stroker Pistons - 4.100" bore
Hard Anodized Piston Coatings
H-13 Wrist Pins
Custom Total Seal Rings
Custom Carrillo ProH Connecting Rods with CARR Rod Bolts
Winberg Billet Crankshaft - 4.050" stroke
ARP Main Studs
H/HX High Performance Engine Bearings
O-ringed decks

http://i1233.photobucket.com/albums/ff387/demonperformance/IMG_20170117_165419067_HDR1_zpsxmiovum2.jpg (http://s1233.photobucket.com/user/demonperformance/media/IMG_20170117_165419067_HDR1_zpsxmiovum2.jpg.html)
http://i1233.photobucket.com/albums/ff387/demonperformance/Hellcat%20Twins%202_zpsoj8tqqzh.jpg (http://s1233.photobucket.com/user/demonperformance/media/Hellcat%20Twins%202_zpsoj8tqqzh.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/hellcat%20twins_zpsqdfehfcm.jpg (http://s1233.photobucket.com/user/demonperformance/media/hellcat%20twins_zpsqdfehfcm.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/IMG_20170117_165525412_HDR1_zpsldsijbbu.jpg (http://s1233.photobucket.com/user/demonperformance/media/IMG_20170117_165525412_HDR1_zpsldsijbbu.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/IMG_20170117_165607071_HDR1_zpsytypfwzl.jpg (http://s1233.photobucket.com/user/demonperformance/media/IMG_20170117_165607071_HDR1_zpsytypfwzl.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/IMG_20170117_165709514_HDR1_zpsi24cm5q9.jpg (http://s1233.photobucket.com/user/demonperformance/media/IMG_20170117_165709514_HDR1_zpsi24cm5q9.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/IMG_20170117_165620729_HDR1_zpslvrwquvm.jpg (http://s1233.photobucket.com/user/demonperformance/media/IMG_20170117_165620729_HDR1_zpslvrwquvm.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/IMG_20170117_172449750_HDR1_zpshqe9pdo8.jpg (http://s1233.photobucket.com/user/demonperformance/media/IMG_20170117_172449750_HDR1_zpshqe9pdo8.jpg.html)

http://i1233.photobucket.com/albums/ff387/demonperformance/hellcat%20oring_zpse9kq7puq.jpg (http://s1233.photobucket.com/user/demonperformance/media/hellcat%20oring_zpse9kq7puq.jpg.html)#DEMONIZED

ChuckWagon
01-18-2017, 10:48 AM
:drool: engine porn...

I want...I just can't afford:(

no1special
01-18-2017, 10:55 AM
Wow!! Engine porn for sure. What head gaskets will be used with the o ringed block?

DemonPerformance
01-18-2017, 11:02 AM
:drool: engine porn...

I want...I just can't afford:(

We have plenty of other variants and options for you though. Currently we have about 12 built G3 HEMI's here at the shop and another dozen or so blocks being machined and built up over the next few weeks!


Wow!! Engine porn for sure. What head gaskets will be used with the o ringed block?

We generally run an MLX or copper gasket with an O-ringed block (application and power dependent of course). We also have an offering for a new combustion clamping system. We’ll fire hoop the heads and receiver groove the blocks and run a copper gasket with our custom KSI625 head studs(150ft lbs or torque!). The fire hoops are a single piece hoop, not a wire with an end gap. Top fuel stuff for our 4 bolt heads! Bye bye headlift at 30psi :P

uglyman8
01-18-2017, 11:31 AM
We have plenty of other variants and options for you though. Currently we have about 12 built G3 HEMI's here at the shop and another dozen or so blocks being machined and built up over the next few weeks!



We generally run an MLX or copper gasket with an O-ringed block (application and power dependent of course). We also have an offering for a new combustion clamping system. We’ll fire hoop the heads and receiver groove the blocks and run a copper gasket with our custom KSI625 head studs(150ft lbs or torque!). The fire hoops are a single piece hoop, not a wire with an end gap. Top fuel stuff for our 4 bolt heads! Bye bye headlift at 30psi :P

All of this engine talk is getting to me! Love it. I want fire hoops.

madcoder
01-18-2017, 12:01 PM
*drool*

DemonPerformance
01-18-2017, 12:32 PM
All of this engine talk is getting to me! Love it. I want fire hoops.

Let’s do it! Ready when you are :)

ecNick
01-18-2017, 12:35 PM
Man, that's nice! I gotta come check out the shop. I'm in Charleston!

DemonPerformance
01-18-2017, 02:15 PM
C'mon down Nick! We have a lot of Demons rolling around your area ;)