Results 1 to 1 of 1
  1. #1
    Join Date
    Feb 2012
    Okeechobee, Florida
    Post Thanks / Like

    Install SRT stuff in an SXT

    I had been reading about others upgrading their SXTs, and I have always wanted to have the leather steering wheel and buttons on the wheel to control the radio. Well, I decided to go all out. I got a steering column w/wheel and instrument cluster from a 2010 SRT. I installed the SCM, clock spring and leather wheel to my original column. The gauge cluster was a straight up swap. Once all this was done, I fired up the AppCar software and started looking through things that I wanted to change. I now have DRLs running through the high beams. Started raining, so I did not get a chance to really work through all the settings. I have not, as yet installed the uconnect device, but once that goes in, I will have a compass shown on the dash. I have had zero issues so far and I think as long as I don't go nuts changing settings, things will probably be good to go. I took a few pics during the swap and thought I would post them up to show others. Basic things like how to disconnect the dash panels are located all over the site, so just do a bit of sniffing around, you will find what you need.
    Last edited by blkadder; 06-13-2019 at 03:39 PM. Reason: Pics Added

    ...Semper Fidelis...

    2010 Dodge Charger SXT
    BT catch can
    BT emblems on front and rear
    Power Stop Z26 Extreme drilled rotors
    R/T leather steering wheel w/switches
    R/T EVIC cluster (mostly working)
    Likes hotrod1, sojiaraggs9000, BlackAce liked this post

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts