LX Forums Forum banner

PWR monster build

174K views 2K replies 104 participants last post by  08superbee#513 
#1 ·
alright i made the jump to a PWR forged 393 stroker for high, high boost. Making this thing damn near bullet proof with i beam rods, those nice manley 393 pistons, the arp hardware for the main caps and arp main bolts. i will add arp head studs when it arrives or send it to them depending on if they mount my heads. I also got the pwr pro street heads so i can run as close to 7k rpm as the tcm will allow. have not discussed cam yet but it will me very aggressive with decent lift set up for high boost 17-20+ lbs. also have a wet nitrous kit thanks to srt007 who keeps digging me deeper into engine power. will start off with a single 75 shot and possibly work my way up to 150 shot. will be adding a upgraded flywheel and would like to get a scatter shield for my tranny. should also be adding the ams 1000 to control when my boost kicks in to allow me a little better traction out of the whole. :stir::racing::rock::banana::beerchug::modding::beerchug::beerchug::banana::beerchug:
 
  • Like
Reactions: WTFO09r/t
#3 ·
included in the order didnt think twice about it lol.
 
#5 ·
ahh i will talk with them to be sure.
 
#6 ·
i looked them up where do you order them?
 
#8 ·
thank you magnumrt05
 
#10 ·
talked with brad says theirs offer the same ring in them and is what they are using on their high boosted strokers. If he feels they are good to go i will take his word for it.
 
#12 ·
awesome bob let me know.
 
#16 ·
Thanks mike I'm going to get as much as I can lol. Mike what timing are/were u tuned at when u hit 780+ at 16psi?
 
#17 ·
well got off the phone with brad and i just cant say enough about these guys. i had some concerns about the build and they took care of all my concerns and now we are building a 419!!! I had nothing against the 393 i just had my heart set on the 419 and they are going to take care of me on it so i am more than impressed. also getting the upgraded flex plate from builderbill with arp bolts for both it and my torque converter. will be talking with southernhotrod monday about a scattershield for the tranny.
 
#21 ·
got the i beam rods and all arp hardware so im excited about this!
 
#25 ·
sounds like a great build going on for sure!! can't say enough good things about my PWR built 6.1. Wanted a 6.1 built for lots of boost and Andy made it happen!! 10.7 right out of the blocks on just the blower. not too shabby for a 6.1!!! can't wait to see what my 200 shot plate system will do!!!
 
#26 ·
nice a 200 shot. im starting with a 75 shot and will make my way up.
 
#30 ·
im trying to sell the shortblock with the cam that made a hell of a combo but nobody wants it so i will just keep the numbered superbee block. cam is spoken for as soon as i get a little down payment to lock it in.
 
#34 · (Edited)
Andy at Performance Werks Racing informed me that he would be glad to do a group buy on the cometic phuzion head gaskets. I need 3-6 people in on this to get a ton off. Pm me for price as it is too low to advertise and if you want to sign up.

1. Superbee#513
2. 8yourM5
3.
4.
5.
6.
 
#37 ·
added you bud. come on guys jump on this and save some money best gaskets you can get.
 
#38 ·
nobody else wants to jump on this deal???
 
#39 ·
Make a new thread for it. Or did I already see one?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top