5.7L Hemi Registry # 00344 RobAGD

[RobAGD]

Forum Username
RobAGD

Real Name
Robert

Vehicle:
2005 Dodge Magnum R/T

Vehicle Color:
Black Pearl
-----------------------------------------------------
Factory Options:

Lt Gray / Greystone Leather Int
Protection Group
Cold Weather Group
Electronic Convenience Group
Trailer Prep Group
Convenience Group II
Power Sunroof
Navi
Sirius
UConnect
Remote Start

Modifications and Aftermarket:

	Go Fast Stuff
AirHammer Stainless Steel ProtoType w/ Signatures and Plaque	Fri Street Strip Ported & Polished decked Heads w/ SRT Exhaust Springs	Zoomers Cat Back Exhaust
Fri Hellfire Cam	AEM / Morpar Med Length Headers w/ Catted Mid Pipes	Mopar TCM * This thing ROCKS ! *
Billet Tech Fuel Rails w/ AN Fittings and Braided Lines	Pilished McKinney Custom Catch Can w/ AN fittings	39# Ford "Blue Giant" Injectors
AutoMeter Cobalt Fuel Pressure Guage	PLX DM-100 w/ SM-AFR Display and Wide Band Air Fuel guage	DashHawk Data Logger
Innovate SSI-4 Dataloger	Diablo Predator w/ Custom Tune from ProMotion Tuning & McNews Automotive	Inertia Tuning Part Throttle & Custom Race Tune
Hoosier 275/40/17 DR's	Outerwear Dry Charger	17" Forged Cobra Wheels

	Curvy & Stopping Stuff
SRT Takeoff Springs and Dampners	Hotchkis Stage 1 TVS Package Springs & Sway Bars Springs Removed	SRT Take Off Brembo Brakes
ShiftHammer Thumb Shifters		SRT Magnum Wheels w/ F1's

	Ohhhh Lookie at Me Stuff
Factory Black Headlight Housings	06 Dodge Daytona Seats Dark Slate w/ Orange Stiching	Art of Noise 10" Sub Enclosure
Tower LED Turns ( all 4 )	22 Elite Padded Leather Console Cover Dark Slate w/ Orange Stiching	HIR Hi & Lo Lamps
Tower LED's Brake Lights	22 Elite ReSkined Head Rest w/ Embroidered MAGNUM R/T	HiFonics 600w Amp
Painted Calipers Gloss Black	Foose Nitrous Greys 20x8.5 F's 20x10 R's w/ Perilli Scorpions Zeros 265 45's F 295 40 R's	Dayton 10" Sub
LED Backup Lamps	Medium Tint Taillights w/ Clear Turns and Reverse Lens	44mm Festoon Bulbs (4) Interor
Factory Glove Box Light	Factory Auto Head Light Switch Panel	Factory Mud Flaps
06 HEMI Badges	Removed Side Moldings	Charger Chin Spoiler

	Mods Removed:
Gibson Headers INSTALLED good for 20hp 30ft lbs !! *SOLD*	Highflow Cats & Midpipes *SOLD*	Voilant Ram Air Intake ( Modified ) *Removed*

	Mod Threads:
Voliant Ram Air thread	Glove Box Light	ShiftHammer in the Steering Wheel
Daytona Seats	Daytona Seats Part 2	Instaling PLX DM-100 & SM-AFR
LED Resistor Install	Headlight Lens Pitting, an Attempted Fix....	Indexing Spark Plugs
Installing SRT8 Take off Suspention	Gnarly Wheel Studs ? Lugnut Stud Repair	Another Shaved Rear
Redyno and Heads and Cam Install	Custom McKinney Catch Can w/ Custom Bracket	Fuelish thinking, Injectors and Fuel rails...
Replacing Wheel Studs	Air Freshner Mod

	Drag Racing Stuff
MIR Bone Stock	English Town 10/7/06 Winner !	Cecil 10/25/06
Rocking Cecil	13.25's at Capitol Raceway

	Misc Stuff
Go West young man to Spring Festival **56k Beware!!!**		Adding Quick Release Mounts and other doodads to Video Camera
Spring Fling Track Day		Brake Bleeding

	Videos !
Its Goes Bliddy bladdy		Zoomers Dyno
Spring Fling 07 AutoX		Spring Fling @ Fontana RobAGD & Junior vs Tirewall.....
Going 12:50's at Etown		Burnouts @ Cecil the Day I ran 12.04
Running 1:29 @ NJMP Track Day		Group C Rolling Speed Bump

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

[RobAGD]

Well Ordered The Silver Turn Signal Bulbs, The HIR High and Low Beam bulbs, Floor Mats, ordered 06 Hemi badges, ordered 2 new RFID Keys.

Started the Debadging

Got car Detailed after 6 miles of gravel roads at my dads.

On a buy list for Zoomers

Humm I think thats it :D

-Robert

[RobAGD]

Installed the HIR's ( well 3 of the 4, that last one whipped my ass )
Installed the Mud Flaps
Ended up getting the wrong Silver Bulbs, so those are going back.
Zoomers are paid for and SHOULD I hope be here Friday this week.
06 HEMI badges are in, but not installed yet.
Did the 1300 mile inital oil change to get the production goo out. I'll be switching to Mobil 1 or Royal Purple at the 3k change

-Robert

[RobAGD]

Here is a little pic of the new Hemi badge on the driver side.



-Robert

[RobAGD]

Ok Zoomers are in and I have to say that these are worth the price just for the sound alone. I honestly don't think that I'll see the high side of 15mpg until I get use to that lovely sound under WOT.

A funny thing, mom is about the biggest non car person alive noticed it right off, first the tips then the sound when I started it :D

Ordered 300c Auto Lights Switch and Glove Box Light/Switch

Looking into Memory box for the seats to remember seat settings.

-Robert

[RobAGD]

Auto Light Switch Installed, only minor headaches with that. Those clips are a bastard to get to.

The Glove Box Light is Installed, making the templet was the hard part, UNI Bit and Dremel with a medium Carbid Burr tool finished up the hole.

NO dice on the Memory module yet.

-Robert

[RobAGD]

Swapped out the Silver bulbs and installed Tower LED's at all 4 corners along with LED backups, Led Brakes and swapped out the 2 front and 2 back int lights with 9led Festoon 44mm bulbs.

Looks Great, not I just have to fix the fast blink issue.

-Robert

[RobAGD]

Fast blink fixes, Each bulb needs a Resistor. I have 2 3 Ohm deals on mine now, but that are drawing why too much power. I am looking at getting down to 15-25 Ohms and loosing some of the heat. I am alo looking at soldering in the fix vs the wire crimp in.

-Robert

[RobAGD]

Ok Turns are all fixed up. Used 4 15 Ohm resistors. Did the solder work as well. Its all good and not overly hard.

15 Ohm Resistors

Post of my hack work : LED resistor install

Enjoy more to come !

-Robert

[BrilliantBlackHemi]

Nice. Ordering 4 of the 15 Ohm units.

[RobAGD]

The Dodge Daytona Seats went into today. The rears need more work, the side bolsters need to have the skins swapped and the Seat Backs need to have a Skin Swap as the latch mechnisim is way differnt between the Daytona/300c and the Magnum :(

So not bad over all I got Way better seats that hold my tooshie better, I got 8 way power passenger seat now and I am on my way to replacing the Sandstone color interier.

Down side - Well $1000 bones is a bargin but its still a grand, Needs to be retuned with a startscan ( airbag light ), having to get skins swapped $$$

Now to figure out wtf that extra plug on the seat is for.

-Robert

[70GT6]

	Quote:			Originally Posted by RobAGD
	Now to figure out wtf that extra plug on the seat is for. -Robert

Power adjustable pedals?

[RobAGD]

Naw, I have those, its on the drivers side ( power pedels ), the extra plug is on the passenger side.

-R

[Hemi31]

Try the airbag weight sensor?

[RobAGD]

Hemi31 - Well I dont think thats it, as there would be a connector for the Magnum seats as well.

So far Everything else works and well, I am not going to test the airbag by hitting something at speed

I am hoping I can talk trhe dealer down the road from me into doing the work and giving me a lift to work and picking me up Its only 3 miles so I amd really hoping Makes my life a lot easier.

I'll post up when I find out what it is.

-R