I finally got around to do this. about 1/2 hour. Bought a sheet of carbon fiber style adhesive film and took those four covers off and stuck these on there. I had them painted before and wasn't happy. over time my ring had scratched the paint. A roll of 24 x 12 was about $15.00 free shipping. Next is the center console cover around the shift knob.
Last edited by Blendzol; 10-28-2011 at 01:20 PM.
Can you pm me the info where you purchased it?
Does it have the feel of carbon fiber?
Its looks great!!!!! Like how it came out
looks good... i thought about vinyl wrapping mine, but i think i am going to end up getting the black pieces off ebay.. i painted the lower ones, and it looks alright, but it is slowly wearing off.
p.s.... you need gas...
2006 Brilliant Black Magnum SRT8
Inertia 218/226 on a 114lsa, hotchkis suspension
hurry up and do the bezel around the shifter. i did and it looks good, but i also did the silver part of the shifter nob wrapped. it looks good but the knob has a few very tiny parts that you can see silver cause of wrap retracting from the curves when it cooled down
2007 300c srt-d. 5.7 180 t-stat, underdrive pulley, long tube headers, 3k stall, sidewinder cam, egr block off plate, sts kit currently at 5 psi
I just did the bezel around the shifter and it came out real nice. This material feels like carbon fiber and it is user friendly especially with a heat gun. here is the link for the ebay vendor selling this.
and his ebay id is Truelineautomotive USA
Last edited by Blendzol; 10-28-2011 at 11:56 AM.
A friend of mine gave me the "puff type" plastic stuff and I put that on. The FIT was NOT as perfect as I had hoped but this was FREE and put it on my everyday driver.
(I'm sure the film YOU HAVE fits much better.)
Old Geezers LOVE cars too!
HEMI registry #864
2006 Black Magnum SRT (SHADOW)
2005 Red Magnum R/T (LUCKY)
2005 Blue Magnum R/T (BLUE)
2006 Silver SuperCharged 300 SRT (643HP)