Ok Everyone, Here is the latest Sale from PWR......
Short blocks on sale at the following prices:
346ci (5.7 based) forged short block $2556.10 + Core Charge and shipping
395ci (5.7 based) forged short block $3436.10 + Core Charge and shipping
371ci (6.1 based) forged short block $2556.10 + Core Charge and shipping
393 ci (6.1 based) forged short block $3436.10 + Core Charge and shipping
419 ci (6.1 based) forged short block $3436.10 + Core Charge and shipping
These motors are all based with the standard options of,
Hot-tanked no less than 3 times
Bore gauge used for verification of cylinder bore, main journal and rod journal
Each cylinder diamond honed with tq plate
File-fit each piston ring to each cylinder for proper gap
All bearings measured with Mitutoyo equipment
Final assembly performed with ARP lube, Clevite bearing lube, and break-in engine oil
Engine blueprint available upon request
Engine wrapped in sealed engine bag and coating with anti-rust preventative.
K-1 3.795" Forged Crankshaft
K-1 6.200" H-Beam Rods
ARP 2000 Rod Bolts
Manley 4.06" 2618 Forged Pistons
Total Seal Ductile Steel Rings
Clevite H series main bearings
Clevite H series rod bearings
Block is decked to ensure flatness
All main journals line honed
Complete hardware kit included for installation
3 Year/36,000 mile warranty when installed/tuned at authorized location
If you would like to add any of the option from the webiste www.pwrparts.com please contact me for specific pricing.
FRI Econo Heads & FRI Sidewinder: Installed @ BFNY by Hemi31 with special guest Fnkychkn, JBA Shorties, JBA/HHP hi-flow catted mids, stock SRT8 cat-back, C&L CAI.
HUGE thanks to Hemiwagn and HalfFast Performance for making it all possible.
hahahaha... Your a sharp one this morning Dave.
Stock catback, and stock drivetrain
Typing from a tablet, excuse typos.
What's a tax refund ?? Bastages always want checks from me
Great looking deals !!!
Arrington Forged 6.1..ported 5.7 Eagles..HHP Ported Intake
227/235 cam..Paramount Trans..Dominator..RPM Roll Bar
Nitrous Outlet..DSS driveshaft..CTP DSL..'09 Getrag 3.06
Kooks..Corsa..LMI 4"..ATI 13% UD pulley..Billet Tech..BFNY
firstname.lastname@example.org w/1.61 60' NAemail@example.com w/1.51 60' N20
I always pay tooo..
brad you have pm bud. great sale guys!
PWR Prostreet 419 twin S300sx3-66 78/73mm Turbos,SHR Tranny,Protorque 4400,Super Dana 44,KWV2 suspension, Fore Fuel System W/Triple Walbros, ID2000's, Arrington 90mm TB Ported Intake W/Thermal Coating, Weld Racing Wheels 17x8 & 17x10, AMS 1000, Eurocharged TCM
06 rt, SMS supercharger with custom CRANK THIS PERFORMANCE cai, ARRINGTON 90mm, srt exhaust, corsa cat back, SMS big brakes, quaife ltd, kwv2, hotchkis sways, eibach front upper A arms, custom front strut brace and sub frame brace by STACK, R.E.M rear strut brace & matrix sub frame brace, TRUFIBER carbon hood.
Friday morning bump
Until tomorrow night, I will split the shipping with you on purchases of short blocks....
You guys just HAD TO go ahead and include some 5.7-based offerings, didn't you? ... lol
What would be the upfront $$$ for that forged 346, shipped to Erik at BFNY
And what kind of boost can it take, as is, for that $2556 ?