I wanted to set you guys up with some combo pricing for front and rear kits. SPC is an awesome company who stands behind their products 100%. Check out my prices on the following kits.
CHRYSLER/DODGE FRONT CAMBER ARM
This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when you lower these vehicles for performance or appearance. Our tubular design incorporates our low-profile adjustable ball joint.
Note: NOT for AWD vehicles
66030 Right 66035 Left
Front Adjustment range: Camber -2.0 degree to +2.0 degree Caster -1.5 degree to +1.5 degree
Chrysler: 2005 - Up 300C RWD
Dodge: 2005 - Up Magnum RWD, 2006 & Up Charger RWD
Rear Camber Arm Bushings
It is now possible to adjust the rear camber on Chrysler's new LX platform. This pair of offset bushings replaces the stock bushings on the rear control arms by .75 +/- or 1.5 +/- adjustment.
Rear Adjustment range
66010, 66080 - Camber ±.75 degree
66020, 66085 - Camber ±1.5 degree
Chrysler: 2005 - Up 300C
Dodge: 2005 - Up Magnum, 2006 & Up Charger
$485 shipped in the Lower 48
Wham, bam, thank you LX forums.
For some reason I feel compelled to use this smiley.
Last edited by THMotorsports; 05-19-2011 at 10:44 AM.
On sale til Friday!
Happy Friday all.
Plenty of these ready to go.
Happy hump day!
Happy Friday w00!
Bump it up for Monday!
I would have bought one by now but its too confusing trying to figure out which set of bushings fits my car
2007 Sublime Daytona #667Now on 24" Status Symbols
Yea, you would think all of the cars use the same one?
397 Stroker - ProCharger - BRING IT!
Pm me with what questions you guys have, im more than willing to help!
Hope everyone had a great weekend!
Bump, thanks for the recent orders!
Do you guys have the ball joint or part number for it if it needs to be replaced?
"The 5.7L engine was designed to be a balance of cost, weight, and power. The SRT 6.1L engine was designed to kick ass." - Team SRT
"She'll make point five past lightspeed. She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself." Han Solo - the future of Hot Rodding
No sorry, the balljoint and the arm are sold together.
I just called (those just pick up before the first ring ends) and they confirmed they are replaceable the p/n is 660306
2006 Inferno Red Charger R/T|Zoomers|C&L Intake|Retro Mag 500 Wheels|Pedders Touring Plus w/ adjustable camber|General Grabber UHP 255/55/18|Flat Black Daytona Grille|BT Catch Can|SRT-8 Rear Diffuser|Mopar Chin Spoiler