I don't know if this has already been posted, but I shot a picture of the belt routing for my own reference tonight.
I can't find a routing schematic anywhere on the car or in the owner's manual.
Since I only do it about once a year, every time I take it off, it takes me 20 minutes to figure out the routing.
You must have been reading my mind, I have been carrying a spare belt just in case and have been meaning to draw a picture now I will just print it
There is a picture of it in the service manual and how to route it, that is what I used this weekend when I put my UD pulley on. I can't post it from my phone, if someone doesn't beat me to it I'll post it when I get home.
Last edited by metgo; 04-06-2009 at 07:43 PM.
Originally Posted by JusticePeteMy Pedders ExperienceOriginally Posted by JusticePete
SRT MAX 112 LSA | Inertia Bg Valve heads | SLP Longtubes | Gutted Cats | SLP LM1 | AFE Stage II | 90mm TB | 25% Underdrive pulley | Mopar TCM | Pro Torque 2800 | Getrag LSD | Inertia CMR tuned | Pedder Track II | 402 rwhp 406 rwtq12.3 @ 112
we use the charger pamphlet from the dealer...you know one with all the pretty pictures and all :D
Current - 2015 Chrysler 300S V6 rwd - Bright White
Current - 2005 Dodge Magnum R/T - Brilliant Black
Current - 2006 Dodge Magnum R/T - Cool Vanilla - parts car
Current - 2012 Dodge Journey SXT V6 - Pearl White
Gone - 2011 Ford 'Whorus' Taurus Limited - daily driver
RIP - 2005 Dodge 'Dirty Whore' Magnum R/T (12/7/11)
try it with a vortech blower installed....not fun at all if you don't the correct route.
Derrick @ Auto Performance Aesthetics Club
i just remember...
it goes OUTSIDE all of the pulleys EXCEPT the two that dont drive anything.
it goes INSIDE the two tensioners.
if that makes sense,
and fwiw, metgo is correct, there is a routing diagram in either the parts manual or service manual, i cant remember which
'99 FRC Corvette - Far From Stock
'06 Silver R/T R&T Fully Loaded [SOLD]
->FRI'd with Street/Strip Heads + Scud Camshaft<- CTP Spacers + 09 Eagle Manifold
-FRI Custom Stepped LT Headers--Getrag 3.06 LSD--DIABLOsport Predator--Powerbond 25% Underdrive Pulley--ProTorque 2800
-FRI PolyMounts--GSM Cold Air Intake--180Tstat--RTJunkieNOESP--MoparTCM--PEDDERS Touring Kit--Billet Tech Throttle Body
Best ET: 12.490 sec @ 113.58 mph +400 DA, 4000 RaceWeight
This might be a little easier for some people to understand,
Used this info today, thanks
Lovin me some BBW - Big Beautiful Wagon
06 Inferno Red SRT8-
Gofast: Frankentake, MTCM, Tranzformer, Diablo Trinity, Billy Boat Cat back
Gocontrol: Eibach front/rear sways, Morpar strut tower
Goloud: Parrot Asteroid Smart, Fosgate 3Sixty.3 sound processor, Hybrid l4 dash/PPI P900.4, Image Dynamics xs69 doors/ Hybrid l1v2 tweeters/PPI P900.4, DD 9518/Sundown SAZ-2500D
>>Click Here to see my Audio Build log <<