Page 1 of 2 12 LastLast
Results 1 to 15 of 25
  1. #1
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like

    F1A Blower/Heads/Exhasut/Headers

    Description: Selling some pretty good parts of my car before I start a new build as I dedicate my car race only. Parts are off my 2007 dodge charger srt8. Parts are still on car but will be coming off as soon as i can get it in the shop. Prices DO NOT include shipping

    Procharger F1A, Big Red Race Valve, Mounting Bracket, Stage 6 Custom FMIC (3 pulleys) , Gear head bracket brace ($5500)

    Injector Dynamics ID 1000’s ($750)

    B & B Stainless Steel CAT BACK ($900)

    Kooks 1-7/8 long tube headers with gutted cats mid pipes ($800)

    Brilliant Black Powder Coated Ported Intake Manifold with Nitrous Outlet 2 stage Direct Port Nitrous system With 3 bar MAP All lines and fittings, NOS Filter, Bottle Pressure Gauge, ($3500 plus your core intake manifold doe snot have to be ported)

    4 bottles:
    2 with custom air brushing 125 Each

    2 Zex Purple Bottles 100 Each

    Nitrous Outlet Dual Bottle Bracket Mount $250

    NOS 2 stage Mini Controller $150

    2 Bottle Warmers 50 Each

    Nitrous Outlet Under Hood Dedicated Tank $700 (Can make a deal with intake manifold)

    6.1 Ported Heads (no core) ($2000)

    Blower Cam ($300)

    Rear Red Brembos (calipers could use some touching up) with drill/slotted rotors ($300)

    Full Srt8 Interior Seat $1000

    Brilliant Black Front/Rear Doors

    Rear subwoofer

    DVD/NAV

    Steering Wheel

    Pretty much anything you can think off out the interior

    OEM Front/Rear Glass

    8.8 Ford Racing 3.73 Gears
    8.8 Ford Racing 4.10 Gears

    Price (USD): $1

    Location: Parts will be coming out of Florida
    Shipping & Pickup: Can Meet / Pick Up in person, Can ship within Country
    Shipping Cost (USD): $1




    Likes SNOMAN1174 liked this post



  2. #2
    Join Date
    Jul 2016
    Location
    Fort Meade, MD
    Posts
    96
    Post Thanks / Like
    Can you provide more info on the heads?


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like
    The heads were CNC ported by inertia motorsports. I will have to go on their website but I think they do the 5 angle axis valve job they have the stock SRT8 Springs and valve though

  4. #4
    Join Date
    Jul 2016
    Location
    Fort Meade, MD
    Posts
    96
    Post Thanks / Like
    Thanks. If they had the upgraded springs I would be all over these! GLWS.


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like
    Can you educate me on what a significance of the aftermarket Springs I'm just asking cuz I've done two engine builds one at about 800 rear wheel horsepower 426/nitrous, the other one right at a thousand and inertia had recommended the stock SRT8 srings on the heads both times even with the large cams I was running

  6. #6
    Join Date
    Jul 2016
    Location
    Fort Meade, MD
    Posts
    96
    Post Thanks / Like
    I'm fairly new to messing with the Hemi, but I have always seen on the forums that in order to install a high lift cam upgrading the springs is necessary. Also, I have spoke to vendors that have said the same.


    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    Jul 2016
    Location
    Fort Meade, MD
    Posts
    96
    Post Thanks / Like
    Found this on the HHP site, "If you plan on installing ported heads and a mid-range camshaft (approximately .530 lift) in your 5.7L HEMI, then using the stiffer 6.1L HEMI exhaust springs (used for both intake and exhaust valves) is a cheaper alternative to the pricey stiffened springs needed for the high lift camshafts."



    Sent from my iPhone using Tapatalk

  8. #8
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like
    Cool beans, i know i had ran some really high lift big cams and the srt8springs in both of my build had been more than adequate.

  9. #9
    Join Date
    Jan 2016
    Posts
    57
    Post Thanks / Like
    I'll take the kooks

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  10. #10
    Join Date
    Jan 2016
    Posts
    57
    Post Thanks / Like
    Quote Originally Posted by Boomstick View Post
    I'll take the kooks

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    How much the for the steering wheel


    Sent from my SAMSUNG-SM-G930A using Tapatalk

  11. #11
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like
    BoomStick, has first dibs on the headers!


    Anyone want to make some reasonable offers on other parts

  12. #12
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like
    Just for those guys on the fence I think I will let drop the price of the blower to 5K plus shipping this week. Had some guy son the fence so I figure I will call their bluff.


    Procharger F1A, Big Red Race Valve, Mounting Bracket, Stage 6 Custom FMIC (3 pulleys) , Gear head bracket brace $5000

  13. #13
    Join Date
    Oct 2009
    Location
    NW Houston
    Posts
    772
    Post Thanks / Like
    Pm me cam specs/info

  14. #14
    Join Date
    May 2007
    Location
    DFW
    Posts
    6,184
    Post Thanks / Like
    Why no location? You scared?

  15. #15
    Join Date
    Oct 2008
    Posts
    2,666
    Post Thanks / Like
    Quote Originally Posted by Warlock View Post
    Why no location? You scared?
    Scared? Scared of what I have been around this forum dang near since it started.

    Im in N.C. car will be at gearhead in FLA getting parted out
    Last edited by The Phantom; 08-15-2017 at 09:59 AM.

Page 1 of 2 12 LastLast

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •