Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2009
    Posts
    89
    Post Thanks / Like

    Splash screen issue????

    About six months ago I picked up a 12 300c with only 14k. Every time I start the car 300s comes up on the splash screen. I brought it to the dealership and was told they were not sure how to fix it and its really is not a problem. But it's driving my OCD crazy any help would be appreciated.
    Thanks & God bless, Matt



  2. #2
    Join Date
    Feb 2015
    Posts
    298
    Post Thanks / Like
    So when you start the car, the Dodge/Chrysler/SRT logo is displayed for a few seconds on the screen? If so, that is normal and by design. There is no turning that off.

  3. #3
    Join Date
    Jun 2009
    Posts
    89
    Post Thanks / Like
    No 300s is displayed but the car is a 300c

  4. #4
    Join Date
    Feb 2015
    Posts
    298
    Post Thanks / Like
    Looks like someone either swapped the radio from a different car or changed a config in the BCM.
    I'd give Joe over at ZAutoTech a shout and see what he can do for you.
    http://www.zautotech.com/contact.html
    If it's in the BCM, he can advise you.
    If it's the radio, I'm not sure if a different firmware can be loaded or if Joe can poke around in there too.

  5. #5
    Join Date
    Jun 2009
    Posts
    89
    Post Thanks / Like
    Sorry I didn't mean the radio I meant the screen between speedometer & tachometer. Sorry for the confusion.
    Thanks, Matt

  6. #6
    Join Date
    Feb 2015
    Posts
    298
    Post Thanks / Like
    That is called the EVIC.
    That's all controlled by the BCM.
    Joe should be able to help you if you have a TranZformer or TaZer.
    Last edited by DJX; 09-22-2017 at 09:09 PM.

Tags for this Thread

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •