SEMA Report ?????

**Vanilla RT** · 11-07-2004, 12:45 PM

Well anyone go to SEMA, Are their any aftermarket performance parts coming.

**MagnumFreak** · 11-07-2004, 01:04 PM

Watched a SHOW about SEMA 2004 last night on speed channel. Not much info there other than just talking about a Magnum. Mostly ricer stuff and trucks.

**whtabtbill** · 11-07-2004, 04:21 PM

If you go to the sema website, you can see all the stuff that was on display. For instance, Gibson had a set of headers and exhaust for our magnum. There was a borla exhaust for our car as well. I believe there was a sway bar that was shown, but I don't remember exactly. Anyway, you can go to www.sema.org and see for yourself.

**BrilliantBlackHemi** · 11-07-2004, 04:59 PM

Where on the SEMA website can we see the products? It's not so obvious to me.

**MagnumFreak** · 11-07-2004, 05:03 PM

www.semaphoto.com

**whtabtbill** · 11-07-2004, 05:10 PM

you can try here too -- list is to the left side. http://www.semashow.com/content/?id=31968

**BrilliantBlackHemi** · 11-07-2004, 05:11 PM

Thanks.

This is the closest thing I found, and it's not specifically stated for our cars.

http://www.semaphoto.com/default.a4d...M2004110241067

**HEMIHEAD** · 11-07-2004, 05:20 PM

Checked that SEMA site for those parts. Look to be well made. Wonder what the cost?

**Randar_462** · 11-07-2004, 05:36 PM

http://www.semaphoto.com/default.a4d...M2004110223899
here is another grill not E&G

**smackdaddy** · 11-08-2004, 04:49 PM

I never understood Chrylser's affection with a plastic exhaust manifold.

But it is a great excuse to upgrade to headers...in my mind, it's almost pointless to do cat-back + CAI without doing headers.

**morty** · 11-08-2004, 10:00 PM

Thanks.

This is the closest thing I found, and it's not specifically stated for our cars.

http://www.semaphoto.com/default.a4d...M2004110241067

Looks like that's for the truck, the title says 2004.

Hopefully some day soon there will be headers for the Magnum.

**BrilliantBlackHemi** · 11-09-2004, 05:13 AM

In another thread, someone mentioned Dynatech is offering headers as well. I emailed them to get details.

**ImaThorp** · 11-09-2004, 03:33 PM

It was me.

Dynatech had the only header kit i saw. Borla, Flowmaster, Bassani and several others had cat back systems.

the Dynatech headers were full length stainless with hi flow cats and short pipes to tie in where the factory strap clamps are on the H pipe now. they told me 15hp with stock exhuast. I'm sure much more with aftermarket exhaust too. they were $1200 complete.

Another company called DG motorsports has a Lil Red Wagon 2dr conversion that had some cool ground effects kit that they will be selling soon. they also had a sweet looking cuda style shaker hood scoop in a fiberglass hood they are selling. their webiste in not updated with it yet. in fact most of the vendors who offered stuff have not updated their websites and online catalogs yet.

Diablo claims to have cracked the nut on the PCM/ECM and will be offering a tuner in about 2 months. He (Mathew) told me it wasnt just a lame kit that gave you cooler fan temps and stuff. He claimed to have been INTO the tranny shift points and all the good stuff. even turned off the MDS.

ZEX has a wet nitrous kit that works off the TPS. NOS and NX had nothing.

Magna superchargers has all the design work done and ready to mill but cant get the PCM/ECM nut cracked. they said they wont sell a kit that runs off a standalone management system. he said 45 days to release once they figure out the PCM/ECM.

Allen engine was in the same boat as far as the management system. no one can do much for us until the aftermaket cracks the nut on the computer. its not as simple as one would think. The ESP is taking control and monitoring so much.

Wheels everywhere.... name it!

and then there were the Lambo style door kits.... almost every Magnum and 300C there had them.

what are you looking for i can try to remember if i saw it and who has it....
Todd