New Embroidery Idea for your LX..Rear Armrest/Cup Holder

**Jina's Embroidery** · 08-05-2007, 07:18 PM

Many members have asked us about this mod and we recently discovered, through another member, how the rear armrest can be removed and thus allowing us the ability to embroider this item. After putting the right rear seat in the down position a TORX bolt is visible, simply remove this bolt and the whole armrest will wiggle out. Here's how they look after embroidery is done.

This was a custom design done for a forum member on his new Katzkin cover.

This is our personal Magnums custom design embridered armrest.

Cupholder side can be embroidered as well

Again this is our Magnum. The nice thing is there's no additional cover to buy as we embroider right on your existing cover, and the cover can removed and replaced yourself with a nice wide zipper on the bottom leaving only the cover to be mailed very inexpensively to our location. Of course the whole thing can be mailed to us and we'll R&R it for a small additional charge. Using "STOCK" Dodge/CHRYSLER images, both sides can done for under $100. Remember we also embroider Headrests, Front Console Covers, Your personal "Show Shirts", Hats and many other fun items. Look through our photobucket to get some idea's for your own LX. PM me or send me an e-mail to jinasse@sbcglobal.net for any of your embroidery needs. Thank you, Jina

**COOKZ32** · 08-05-2007, 07:39 PM

Now that looks really nice! This will be my next mod, still haven't found the time to put on the visors patches yet, but this week I hope!! Thanks for showing this Rick and Jina!!

Say does the prize double, I'm only asking because I know I guessed the exact stitch count????

**lowriderman3** · 08-05-2007, 08:31 PM

Mine will be heading your way this week Jina!

**MagNite** · 08-05-2007, 08:37 PM

Heh, I had already thought about having you do that for me. Now with this post, I don't have to ask you......

**Slow4Dr** · 08-05-2007, 10:59 PM

Is the cover easy to take off on the Charger? I'm very interested in getting this done.

**feros** · 08-05-2007, 11:30 PM

Very nice, things that make you say Hhmmmm..

**SilvaSurfer** · 08-05-2007, 11:33 PM

Looks very nice, great idea

**Jina's Embroidery** · 08-06-2007, 12:57 AM

Originally Posted by 06MDCharger

Is the cover easy to take off on the Charger? I'm very interested in getting this done.

I believe all models are set up the same with just one TORX bolt which is very accessible to get to holding them on. You need to fold down the right rear seat and you'll be able to get to it. Once the armrest is out you'll notice a zipper in the back, you will unzip this but first pop out the cup holder thingy by just pulling up on it. It is held in by those black push pin thingys that can be used again when reinstalling the holder. The start wiggling the cover off. It'll take alittle time to wiggle it off but requires no special tools..just patience..lol

**7thS0N** · 08-06-2007, 08:35 AM

Man,

What a great idea!

I wish I had one of those....

OH WAIT, I DO! And it looks fricken sweeeeeet (especially after some of the 'new leather wrinkles' tighted up!), as anyone who saw it at the Shindig will tell ya (see how modest I am?!)

Great job as always guys, you're the tops!

**Aikidoka** · 08-06-2007, 08:46 AM

Thanks for the idea Jina. The wheels in my head are turning as we speak.

**Pug** · 08-06-2007, 10:06 AM

And to think, I was just thinking about getting something embroidered... Do you have a website or something where we can get ideas on prices etc?

**Jina's Embroidery** · 08-06-2007, 02:14 PM

Originally Posted by Pug

And to think, I was just thinking about getting something embroidered... Do you have a website or something where we can get ideas on prices etc?

PM sent

**Strykker** · 08-06-2007, 04:11 PM

Oh my, time to put the evil RAM in the back: Jina did this and he bites too..LOL

**Slow4Dr** · 08-06-2007, 04:41 PM

Originally Posted by Jina's Embroidery

I believe all models are set up the same with just one TORX bolt which is very accessible to get to holding them on. You need to fold down the right rear seat and you'll be able to get to it. Once the armrest is out you'll notice a zipper in the back, you will unzip this but first pop out the cup holder thingy by just pulling up on it. It is held in by those black push pin thingys that can be used again when reinstalling the holder. The start wiggling the cover off. It'll take alittle time to wiggle it off but requires no special tools..just patience..lol

Great patience, the one thing I don't have. Oh well I'll give it a try anyway.

Can you PM me a price for the logo I used on my headrests?