LinkBack URL
About LinkBacksokay i have a 245/45r/20 kumo front tire and run a 275/40r/20 rear kumo tire and wondering they are getting low on tread so dragradial next then so willl a 315/35zr/20 work fine with the front tires ??? or do i need to stay to a 275/40zr/20 for the rear, dont have money to buy mustang cobra wheels so ill just buy the tires...
the rear is a 10in rim.... fronts are 8.5
Results 1 to 9 of 9
Thread: Drag radials
-
10-06-2009, 07:07 PM #1
speedjunkie
- Join Date
- May 2008
- Location
- near springfield missouri
- Posts
- 2,426
Drag radials
Builder Bill Flywheel, Pro Torque 2800 stall,K&N intake,25%UNDERDRIVE PULLIE, SLP LOUDMOUTH EXHAUST
!!!,DIABLO 91 cai tune,ZEX 125shot nitrous ,MSD window switch, talor shorties. DYNATEC SUPERMAXX long tubes, and CATLESS..180 t-stat.Tinted tails done buy me. and lots lots more visual mods...race worrior cam NOT INSTALLED
386 HP at wheels
466 tq at wheels
on 100 shot
OZarks Raceway Personal best 12.8 at 94 mph, 1.9 60 FT. street tires, Faster times to come!
-
10-06-2009, 07:20 PM #2
SpeedRated Motorsports
- Join Date
- Mar 2007
- Location
- Fort Pierce, FL
- Posts
- 6,582
You should be able to run either size with that rim. They will be about the same height. Those tires are about $300 a piece. Cobra rims a little over $100 and the 275/40 Hoosier is about $200 a tire. It will cost a little more to go that route but not much. I tried the 20 inch drag radial. Believe me, you'll be much happier with the 17's.
06 MSRT8 Mods: PWR 419 stroker, w/PWR cam, Mondello Stage 3 heads, Arrington 90MM TB, LMI Carbon Fiber CAI, Dynatech LT Headers, Southern Hot Rod NAG1 HTCr, Pro Flow Direct Port Nitrous, DSS 9" IRS
RIP Lou
-
10-06-2009, 07:36 PM #3
speedjunkie
- Join Date
- May 2008
- Location
- near springfield missouri
- Posts
- 2,426
yea the thing is that i dont want to drive around with 17s all the time lol, cus my rear 20s are getting bald as in no more tread after i run another 10,000 miles when i switch sides.... so im just looking for drag radials for the 20s. i will get 17 one day but no time soon.
Builder Bill Flywheel, Pro Torque 2800 stall,K&N intake,25%UNDERDRIVE PULLIE, SLP LOUDMOUTH EXHAUST!!!,DIABLO 91 cai tune,ZEX 125shot nitrous ,MSD window switch, talor shorties. DYNATEC SUPERMAXX long tubes, and CATLESS..180 t-stat.Tinted tails done buy me. and lots lots more visual mods...race worrior cam NOT INSTALLED
386 HP at wheels
466 tq at wheels
on 100 shot
OZarks Raceway Personal best 12.8 at 94 mph, 1.9 60 FT. street tires, Faster times to come!
-
10-06-2009, 07:37 PM #4
speedjunkie
- Join Date
- May 2008
- Location
- near springfield missouri
- Posts
- 2,426
i was looking at the nitto nt05 for 245 bucks each... i was wanting somthing with a little meat that sticks out the sides unlike my 275s that are flush with the rim...
Builder Bill Flywheel, Pro Torque 2800 stall,K&N intake,25%UNDERDRIVE PULLIE, SLP LOUDMOUTH EXHAUST!!!,DIABLO 91 cai tune,ZEX 125shot nitrous ,MSD window switch, talor shorties. DYNATEC SUPERMAXX long tubes, and CATLESS..180 t-stat.Tinted tails done buy me. and lots lots more visual mods...race worrior cam NOT INSTALLED
386 HP at wheels
466 tq at wheels
on 100 shot
OZarks Raceway Personal best 12.8 at 94 mph, 1.9 60 FT. street tires, Faster times to come!
-
10-06-2009, 07:38 PM #5
SpeedRated Motorsports
- Join Date
- Mar 2007
- Location
- Fort Pierce, FL
- Posts
- 6,582
Gotcha.
Don't expect to get a lot of miles out of the drag radials. I sold mine when I had about 1500 miles on them and the tread was about half gone.06 MSRT8 Mods: PWR 419 stroker, w/PWR cam, Mondello Stage 3 heads, Arrington 90MM TB, LMI Carbon Fiber CAI, Dynatech LT Headers, Southern Hot Rod NAG1 HTCr, Pro Flow Direct Port Nitrous, DSS 9" IRS
RIP Lou
-
10-06-2009, 08:13 PM #6
speedjunkie
- Join Date
- May 2008
- Location
- near springfield missouri
- Posts
- 2,426
wow gone fast hu
Builder Bill Flywheel, Pro Torque 2800 stall,K&N intake,25%UNDERDRIVE PULLIE, SLP LOUDMOUTH EXHAUST!!!,DIABLO 91 cai tune,ZEX 125shot nitrous ,MSD window switch, talor shorties. DYNATEC SUPERMAXX long tubes, and CATLESS..180 t-stat.Tinted tails done buy me. and lots lots more visual mods...race worrior cam NOT INSTALLED
386 HP at wheels
466 tq at wheels
on 100 shot
OZarks Raceway Personal best 12.8 at 94 mph, 1.9 60 FT. street tires, Faster times to come!
-
10-06-2009, 08:49 PM #7
SpeedRated Motorsports
- Join Date
- Mar 2007
- Location
- Fort Pierce, FL
- Posts
- 6,582
Actually, the NT05's you're looking at will last longer. I had the other drag radial. I think they were the 555's.
06 MSRT8 Mods: PWR 419 stroker, w/PWR cam, Mondello Stage 3 heads, Arrington 90MM TB, LMI Carbon Fiber CAI, Dynatech LT Headers, Southern Hot Rod NAG1 HTCr, Pro Flow Direct Port Nitrous, DSS 9" IRS
RIP Lou
-
10-06-2009, 10:17 PM #8
way down south
- Join Date
- Oct 2008
- Location
- thibodaux la
- Posts
- 399
the nto5s are not drag radials but they are pretty darn close. i know a few people who have them and they like them very well
-
10-07-2009, 01:23 AM #9
speedjunkie
- Join Date
- May 2008
- Location
- near springfield missouri
- Posts
- 2,426
yea i thought they were buy the look of them but their close enough for me i guess lol
Builder Bill Flywheel, Pro Torque 2800 stall,K&N intake,25%UNDERDRIVE PULLIE, SLP LOUDMOUTH EXHAUST!!!,DIABLO 91 cai tune,ZEX 125shot nitrous ,MSD window switch, talor shorties. DYNATEC SUPERMAXX long tubes, and CATLESS..180 t-stat.Tinted tails done buy me. and lots lots more visual mods...race worrior cam NOT INSTALLED
386 HP at wheels
466 tq at wheels
on 100 shot
OZarks Raceway Personal best 12.8 at 94 mph, 1.9 60 FT. street tires, Faster times to come!
Reply With Quote
Posting Permissions
Share This Thread