Dash Hawk : 2.1.0 Update ! 5-25-07

[RobAGD]

Go get it, lots of new neat features !

-=-=-=-=-

ou WILL lose settings/screens/etc. made in any previous v2.0 versions ... but the huge plus is that you can now do your setups ON THE PC!

Another quick note:

You must upgrade your DashHawk device to the v2.1 enc BEFORE YOU CAN YOU USE THE PC PROFILES (for obvious reasons ... the v2.0 stuff doesn't know anything about Profiles).

Here's a list of the new stuff for v2.1:

V2.1 DashHawk FIRMWARE Release Notes
Features/Fixes
1. New DataLogger screen
2. New DataLogger manual trigger mode
3. New Staged Alerts functions
4. Categorical PID Menus
5. Expanded DTC and DTC master clear (which clears Historical codes as well)
6. MANY more DTC codes and descriptions
7. Multiple ECUs can report DTCs and be displayed
8. Data “smoothing” when changing screens (to avoid “flashing” zeros or N/A when communications are momentarily disrupted)
9. Support for new PC based Profiles and Settings
10. Metric support for Stage Alerts

V2.1 DashHawk SOFTWARE Release Notes

Features/Fixes
1. Screen Configuration Editor allows user to make “Profiles” for saving/retrieving from the PC and loading/retrieving from the DashHawk
2. LCD Configuration Editor
3. Alert Configuration Editor with selectable parameters, staged Alerts/Alarms and thresholds
4. New Help
5. Customizable Splash Screen
6. Automatic precision for Log Axis
7. Log name displayed in logging screens
8. Metric Support for Staged Alerts
9. Metric Support for graphs, logs, performance tests.
10. Cosmetic changes to logging screens
11. Cosmetic changes to calculators
12. Rewritten User Guide for all the new features

-=-=-


Thanks Ken and the BEta Testers !

-R

[Ghostface Mag]

Thanks for the heads-up Rob..."Beans"..... ..Time to upgrade(once I get my car back out the shop )....

[JamminWagon]

Just finshed it up and the setting area to configure the screen is a godsend!

1 small issue, on time/distance/counts the run time shows 00: 3: 3 instead of 00:03:03 only the 0s
Don’t show up the rest of the numbers do.

Kind of a bigger issue; when I had any WB sensor loaded in the DH, it would reboot (Recording user settings, please do not unplug
Unit until competed) over and over. Of course I did not read the README so it might be addressed in it.

Here are the PIDs that are avail for my SXT

Coolant Temp
Intake Air Temp
Ambient Air TempFuel
Short Term Fuel Trim B1
Long Term Fuel Trim B1
Short Term Fuel Trim B2
Long Term Fuel Trim B2
Commanded Equivalency Ratio
Intake Manifold Pressure
Barometric Pressure
Boost/VacuumSpark/Load
Engine Load
Spark Advance
Absolute Load Value
# of Trouble Codes
Fuel System Status
Run Time Since Engine Start ( the 00: 3: 3 issue)
Distance with MIL ON
Warm Ups Since DTC Clear
Distance Since DTC Clear
RPM
Vehicle Speed
OS Bank 1 Sensor 1
OS Bank 1 Sensor 2
OS Bank 1 Sensor 3(assume for V8s)
OS Bank 1 Sensor 4(assume for V8s)
OS Bank 2 Sensor 1
OS Bank 2 Sensor 1
OS Bank 2 Sensor 3(assume for V8s)
OS Bank 2 Sensor 4(assume for V8s)
Cat Temp Bank 1 Sensor 1
Cat Temp Bank 1 Sensor 2
Cat Temp Bank 2 Sensor 1(assume for V8s)
Cat Temp Bank 2 Sensor 2(assume for V8s)
Control Module Volts
Absolute Throttle Position
Commanded EGR
EGR Error
Commanded Evap Purge
Relative TPSAbsolute TPS B
Absolute Pedal Positon D
Absolute Pedal Positon E
Commanded Throttle
Fuel Level
Knk Sensor 1 Volts
Knk Sensor 2 Volts
Knock Retard
MDS Status
Oil Pressure
Turbine Speed
Output Speed
Trans Temp
Throttle Blade Pos

[RobAGD]

Yea there are still a few things that need to be sorted out but they are getting there. This SW release is a MONSTER improvment over the other as far as setting your screens, alerts and datalogging.

The datalogging screen seems to hold until started, I need to play with it a bit more.

Semi - yea the WB stuff is not working yet fior our cars, We need another peice of hardware for this to get going.

-R

[FactoryD]

Man... I gotta get me one of deez

[JamminWagon]

Yea there are still a few things that need to be sorted out but they are getting there. This SW release is a MONSTER improvment over the other as far as setting your screens, alerts and datalogging.

The datalogging screen seems to hold until started, I need to play with it a bit more.

Semi - yea the WB stuff is not working yet fior our cars, We need another peice of hardware for this to get going.

-R

Yeah i hear about the WB sensor (dont know what it means haha) but I dont remember the other versions rebooting the DH when it was loaded as a montor.

Oh yeah, the oil pressure limit is 148, and I read 147.9 all the time. Maybe raise the limit a lil bit. Being in electronics, I never like to have my meter pegged, not that it really matters wit this.

[JamminWagon]

Man... I gotta get me one of deez

It is a great snooper. Here are the screend that I have loaded in mine. There are also optioins to display up to 7 items at a time. And the data logger is great, not to mention the 0-60 and 1/4 mile loggers.

[lafrad]

damn.

I updated yesterday morning.. I must have missed this update by just a few hours.

This update looks sweet!

[MR. J]

Man... I gotta get me one of deez

Ya, me too.

[mhigham]

damn.

I updated yesterday morning.. I must have missed this update by just a few hours.

This update looks sweet!

Update was put out late afternoon/evening.

Somebody needs to do a MAGNUM and/or HEMI splash screen. I have no skills......haha

Mike

[MattRobertson]

Gawd I wish I was able to update. I've been away from home and will be for several more days and no USB cable here with me. Maybe I'll go buy one.

[RobAGD]

Hey Matt, standard USB mini cable, a lot of cameras use them as well.

-R

[JamminWagon]

Update was put out late afternoon/evening.

Somebody needs to do a MAGNUM and/or HEMI splash screen. I have no skills......haha

Mike

Here is a couple that I have played with 2 color 128x64 bmp

[InferAl]

Upgraded last night still need to set everything ,Thanks

[B00MB00MSTIK]

thats all i did this week was update my DH

fedex delivered it on monday it came loaded with 2.03

so monday/tuesday was 2.03

update to 2.0.5 on wednesday

so wednesday / thursday was 2.0.5

and loaded 2.1 on friday

used 2.1 @ track friday night for 1/4 mile stats