All performance vendors and friends involved!

[USCG Charger]

I wanted to give thanks to quite a few people for helping me get ready for last wkends racing events.

1) Nitrous Outlet: They walked me though my nitrous set up,and sent the items in a timely manor. Dave, Grant, and Chris have helped me out so much with some many question I had regarding the system and accessories I purchased. This is a great company and were overall a pleasure to deal with.
2) Paramount Performance: Bill has gone above and beyond helping me solve a few hick ups with the drive line. He spent his own time and money to make sure I was taken care of. Not to mention his products rock and are second to absolutely no ones. I set several PB’s and even pulled the fronts off the ground using his new 4000 Stall TC!
3) Starr Motors: With out Joe Bonny and his dedicated crew none of the installation would have taken place. I witness on several occasion him and his crew staying past working hours just to make sure the job was done correctly.
4) MOL SRT-8 ( Show & Performance): I gave Ralph a very short time line for days worth of work and he ultimately came though with a new -6 fuel line and custom rear crossover with nitrous fuel adapter and had it at my house in 48hrs (CA to VA) Fellas if that is not service I have no idea what is.
5) Friends: Flybyu(Dan), 1fst4dr(Scott), Jimisland-SRT8(Jim) all had a huge role in helping me decide and walking me through the proper steps in running the Nitrous. Trojan (Chris) total hooked me up with some fuel rails (CRP) he to came though in the clutch with extremely fast delivery to MOL SRT-8. Everyone at MIR and ATCO who pushed my car from the staging lanes and those who took the time to lend a helping hand under the car!
6) PLCman: Fellas let me tell you what is the tits! Raymond along with Billet Tech developed a custom console to run my gauges, nitrous arming, purge, line lock, fans hi/low, and bottle heater! This console is top notch and looks factory like it belongs in the car. No cheap toggle switched, or mismatched switches… all the buttons are 1st class and look great along with the console plate BT etched for me. Raymond spent several months perfecting this console and it shows. No horrid wiring and tapping into several different power sources…. Top of the line for sure on this one!

I know I’m forgetting several ppl but I just wanted to give my gratitude to all those who helped make my wkend of racing worth while.

[bklynmag]

Your ride just keeps evolving and getting better and better Jason. No way it would be possible without your willingness to push the envelope.

[FlyByU]

Good stuff.

Show us a pic of your switches, dont think I got a chance to see those.

[concussion]

Great thread...

Sounds like everyone from vendors to members went above and beyond... so cool.

I hope you're making the trip to Atlanta.
I wanna see that beast run again.

Cheers to you guys,
Burleson

[plcman]

I wanted to give thanks to quite a few people for helping me get ready for last wkends racing events.

1) Nitrous Outlet: They walked me though my nitrous set up,and sent the items in a timely manor. Dave, Grant, and Chris have helped me out so much with some many question I had regarding the system and accessories I purchased. This is a great company and were overall a pleasure to deal with.
2) Paramount Performance: Bill has gone above and beyond helping me solve a few hick ups with the drive line. He spent his own time and money to make sure I was taken care of. Not to mention his products rock and are second to absolutely no ones. I set several PB’s and even pulled the fronts off the ground using his new 4000 Stall TC!
3) Starr Motors: With out Joe Bonny and his dedicated crew none of the installation would have taken place. I witness on several occasion him and his crew staying past working hours just to make sure the job was done correctly.
4) MOL SRT-8 ( Show & Performance): I gave Ralph a very short time line for days worth of work and he ultimately came though with a new -6 fuel line and custom rear crossover with nitrous fuel adapter and had it at my house in 48hrs (CA to VA) Fellas if that is not service I have no idea what is.
5) Friends: Flybyu(Dan), 1fst4dr(Scott), Jimisland-SRT8(Jim) all had a huge role in helping me decide and walking me through the proper steps in running the Nitrous. Trojan (Chris) total hooked me up with some fuel rails (CRP) he to came though in the clutch with extremely fast delivery to MOL SRT-8. Everyone at MIR and ATCO who pushed my car from the staging lanes and those who took the time to lend a helping hand under the car!
6) PLCman: Fellas let me tell you what is the tits! Raymond along with Billet Tech developed a custom console to run my gauges, nitrous arming, purge, line lock, fans hi/low, and bottle heater! This console is top notch and looks factory like it belongs in the car. No cheap toggle switched, or mismatched switches… all the buttons are 1st class and look great along with the console plate BT etched for me. Raymond spent several months perfecting this console and it shows. No horrid wiring and tapping into several different power sources…. Top of the line for sure on this one!

I know I’m forgetting several ppl but I just wanted to give my gratitude to all those who helped make my wkend of racing worth while.

Thanks for the props Jason!!!

Take some pictures if you can so others can see what we created for you.

[moparmike610]

I hope I dont have to push you again............................................. ..............j/k anytime man, hell I've had to push Hemi C at MIR.


Its all in good fun, just hope there is someone there when I break lol


Mike

[jsjahonda(big BK]

Jason, you are 100% right, those vendors and member are on the money, i can stress enough how the guys here help member out, and your car shows it ;-)

[USCG Charger]

Your ride just keeps evolving and getting better and better Jason. No way it would be possible without your willingness to push the envelope.

I've very happy with my ride right now thanks to the vendors that have helped me in the past.

Good stuff.

Show us a pic of your switches, dont think I got a chance to see those.

I will get a picture up asap Dan.

Great thread...

Sounds like everyone from vendors to members went above and beyond... so cool.

I hope you're making the trip to Atlanta.
I wanna see that beast run again.

Cheers to you guys,
Burleson

We will see about ATL not sure If I'm gonna make this one.

Thanks for the props Jason!!!

Take some pictures if you can so others can see what we created for you.

pictures are coming today!

I hope I dont have to push you again............................................. ..............j/k anytime man, hell I've had to push Hemi C at MIR.


Its all in good fun, just hope there is someone there when I break lol


Mike

Mike I too hope last wkend was the last day to push the ride!

Jason, you are 100% right, those vendors and member are on the money, i can stress enough how the guys here help member out, and your car shows it ;-)

LXforums vendors and friends are the ****!

[ujokin2]

Oh my!!! Now that Jason has move over to the the DARK SIDE! Will he be like that infamous JASON from Hollween.... !! LOL

"Little Engine that could" has now metamorphized into the DARK ONE !

[monty1269]

Dayum dude... yer definitely in the deep end of the pool now! LOL! Way to go!

Yea... without the great folks on this forum, I would be clueless... more than I actually am right now! I've learned SO much, and gained a bunch of great friends...

cheers to the entire LX-Family!

[USCG Charger]

PLCman and billet tech custom console...

[BuilderBill]

Thanks for the props Jason!!!

Take some pictures if you can so others can see what we created for you.

The switch panel and your associated handy work are beautiful and functional.
I saw the circuit board under the seat....very clever and functional.

I'm hoping the switch and circuit board can be adapted to the SRT8 Jeeps.
Kudos for a fine product.
Bill

[plcman]

Yes it can all we need is a nice place for the switch panel and whala!
And thank you very much from a fine craftsman like yourself!

[MOL SRT-8]

glad it all worked out jason.

[USCG Charger]

glad it all worked out jason.

Well Ralph if it wasn't for your customer service getting my order to me with in 48 hrs accross country then I might have not been able to run my nitrous set up with no worries.