Awosome Dyno resault!!

[Metalgrinder]

I went to tunning shop today, I brought B&G Stage II to install.
I tried to do Dyno test before and after install B&G PCM, but they recommend to change the Air Filter to HKS from my AKIMOTO also.
So I did 4 times of Dyno like below(tested at 4th gear):

1. 1st : AKIMOTO Air filter & Maganflow with stock PCM. ---------- 409.02 hp/53.52 Kg-m Torque
2. 2nd : HKS Air filter & Maganflow with stock PCM. --------------- 434.7 hp/58.95 Kg-m Torque
3. 3rd : HKS Air filter & Magnaflow with B&G PCM. ----------------- 438.24 hp/59.67 Kg-m Torque
4. 4th : Same as 3rd --------------------------------------------- 441.7 hp/60.13 Kg-m Torque => 440 lbs-ft

HKS increased the 25 hp and 5 torque, it's awesome

[JonzMgnm]

Congrats! Great numbers, man!

I'm not sure the TQ figures are correct.....how did they come up with those numbers? The graph is showing something different.

[HalV48]

[Hemi31]

so you have catback and CAI? hmmmmmmmm.

[RobAGD]

Well he is in Korea, thier dynos cant measure over about 60 ft lbs of torque

Good numbers, If you have the files changethe correction factor to SAE and see what your numbers are doing.

Seeing your torque is in Kg-M its going to throw most people off, you might want to see if you can c9onvert that to a standard measurment.

-R

[Metalgrinder]

Well he is in Korea, thier dynos cant measure over about 60 ft lbs of torque

Good numbers, If you have the files changethe correction factor to SAE and see what your numbers are doing.

Seeing your torque is in Kg-M its going to throw most people off, you might want to see if you can c9onvert that to a standard measurment.

-R

Yes, you right. 60 Kg-m is 440 lbs-ft.

[formerice]

Those are very good numbers. You should contact Rev Hammer. I'll bet he would like to challenge your air intake with his Air Hammer. Any drag strips in Korea yet?

[Metalgrinder]

Those are very good numbers. You should contact Rev Hammer. I'll bet he would like to challenge your air intake with his Air Hammer. Any drag strips in Korea yet?

Before changing Air Filter and installing B&G, I got 13.1 for 1/4 mile here in korea few weeks ago, I have little bit of wheel spin at that race.
I think I can reduce more in the future.

[06SilverSteel]

Good numbers!!

[Metalgrinder]

Please let me edit that stupid title

"Awesome Dyno result!"

[Hemi_charger]

nice numbers why didnt they dyno it in 4th?

[Metalgrinder]

nice numbers why didnt they dyno it in 4th?

Doing in 4th is make better result? I didn't even think about it, I just follow what they doing as their way.

[RobAGD]

4th in our cars is the 1:1 not 3rd like in a lot of other cars.

-R

[InferAl]

What sets that air filter apart from the rest did they say. That is pretty impressive that much hp from a air filter

[Metalgrinder]

What sets that air filter apart from the rest did they say. That is pretty impressive that much hp from a air filter

It's a stand alone product, please check this out

The HKS filter is designed to reduce the restrictions of the stock intake on the ST185. HKS uses a funnel type design to help create a smooth, even air flow, with maximum air flow, creating an increase in engine response and horsepower.
The features which enable the HKS Super Power Flow to achieve it's goal are as follows: The dome shape contributes to the direction of air flow to help maximize efficiency. The super honeycomb frame increases structural configuration to absorb and distribute stress evenly to six different points. High Flow Polyurethane Type Filter - Uses foam type element for maximum air flow. A specially formulated liquid (not an oil) is bonded to the filter element to aid in filtration. Cadmium Plated Bracket/Hardware - To prevent any surface rust on all brackets.