Viper 791XV Installation

[Magnum P.I]

Hey Gang

I have this system (Viper 791XV) i would like to install on my car it is both an alarm with a remote start function. Apart from the items in the box shown below, what bypass module do i need to install it on the magnum. Thanks for all the help.




Winter is coming winter is here so i need to get this in the maggy or the factory remote start is my next option...


Cheers

ODD

[LancesRide]

Here is a link for the interfaces:
http://bypasskit.com/product.aspx?prodid=XK532

[SmoovC]

Here is what you need:

The CHALL is the all-in-one doorlock, transponder and key interface for Chrysler that you've been asking for. It's a data bus module that controls the door locks, factory security, transponder key override (In data) and sliding doors/power hatch.

What makes this unit special is that it comes with a T-Harness for super fast and highly reliable "Plug and play" installation. The module is full 2 way D2D compatible with any DEI remote starter and only requires a single key to program it. (No key required to operate.)

The CHALL will also cover the new generation of "Tip start" models such as the Charger, Challenger and Ram. Fully flashable and upgradeable but comes with all software pre-loaded for quick and easy "out of the box" installs. CHALL covers all models from 2004 to 2010, there is a second "MUX" style T harness required for certain models such as the Nitro, Wrangler & Caliber.

Only one key required to program the module and no key to operate. No transponder used in vehicle, more secure! T-Harness for can type included in kit. Reduced installation time using T-Harness. No soldering or cutting to OEM harness.

[mlgreen]

Here is what you need:

The CHALL is the all-in-one doorlock, transponder and key interface for Chrysler that you've been asking for. It's a data bus module that controls the door locks, factory security, transponder key override (In data) and sliding doors/power hatch.

What makes this unit special is that it comes with a T-Harness for super fast and highly reliable "Plug and play" installation. The module is full 2 way D2D compatible with any DEI remote starter and only requires a single key to program it. (No key required to operate.)

The CHALL will also cover the new generation of "Tip start" models such as the Charger, Challenger and Ram. Fully flashable and upgradeable but comes with all software pre-loaded for quick and easy "out of the box" installs. CHALL covers all models from 2004 to 2010, there is a second "MUX" style T harness required for certain models such as the Nitro, Wrangler & Caliber.

Only one key required to program the module and no key to operate. No transponder used in vehicle, more secure! T-Harness for can type included in kit. Reduced installation time using T-Harness. No soldering or cutting to OEM harness.

So this is a plug and play add-on that will finally get the DEI alarms' autostart to work consistently without having to leave a ground down transponder key in the car?

[Zoban]

Mag PI went with the Mopar starter a couple weeks ago.. Easy to install and does not use a "dead key" under the dash...

[SmoovC]

So this is a plug and play add-on that will finally get the DEI alarms' autostart to work consistently without having to leave a ground down transponder key in the car?

DEI has always had an interface for the LX's that did not require leaving a key in the car. Yes, as per the information I provided this unit will work in your car.