I'm added a few gauges and switches to my interior. I'm looking for a wire to tap so that the lights in the gauges will come on with the headlights/interior lights on the dash. These are going in the center of the dash, down where the ashtray was. I'd love to know which wire I can tap. I think my test light is dead as I couldn't find a wire to tap last night.
Thanks in advance.
The Old: Stock 5.7 Bottom End | Lead Foot | 11.861 @ 112.76 1.63 60'
The New: Forged Arrington 6.1 | MMPG Top End | Paramount Drivetrain | 11.67
ATC or MTC?
i wish they never would have taken away the vehicle profile from post headers.
I don't know what that means Pete. sorry for the ignorance.
i tapped the one for the HVAC panel for the dimmer on my head unit when I had the 300c, RED with Gray Stripe on the HVAC harness, can't tell you which connector though, but my notes say RED/GRY for Panel Light
"A world full of 100% Prius owners is still a world 100% dependent on oil" ~ E. Musk
With Data Bus and all that fun stuff these days, I'd recommend tossing your test light anyway. I'm sure someone will tell me I'm stupid and over cautious but essentially you're allowing those data circuits to ground out with a test light. Get a cheap digital multimeter at the least.
The other over cautious part of me would like to know what exactly you're hooking up to have an idea of amperage draw.
'06 Silver R/T with Road and Track on UAS
passinger side kick panel -brown 26 pin plug> white with purple stripe
thats the parking light wire.
Last edited by sound&security; 01-17-2012 at 07:45 PM.
I'd be unstoppable if it wasnt for Physics & Law enforcement
on the Magnum, isn't there a wire harness plug that was supposed to be used for the clock, same as the 300's up behind the radio bezel. There is an orange / white wire (not 100%) may want to check with test light, like previously mentioned.
Thanks guys, I have the ATC. Sweet. Now I know which one I need.
Awesome. Now if I didn't have a pile of work to knock out tonight, and it wasn't raining balls I could go and use this information. lol.
When I get it all hooked up I'll post up pics.
I tapped the light down by the shifter that illuminates the PRND+/- and my gauges come on with the headlights and dim if I want them to. Just another source to consider.
thread saved to favorites!
I used the wire that Motor referenced.
2012 300SRT--Mods so far....CMR tune from Toona, tinted taillights, Kooks LTs and high flow cats, soon to be released catback, Mopar lowering springs, HIDs in the driving lights, tinted windows, LMI true CAI, and a bunch of BT bling.
2009 MBP GCSRT8 (Sold)
Powered by PWR
Tooned by Johan
Blinged by Billet Technologies