start button

**roadpig** · 03-29-2006, 09:33 PM

hey guys- im mocking up a start button from an srt10 pickup for my rt magnum
was wondering if anyone has got a schematic of the mags ignition switch/wiring
the button is going in the package cubby below the hvac control head
thanks in advsnce- roadpigl

**cdn2usa** · 03-29-2006, 10:00 PM

Originally Posted by roadpig

hey guys- im mocking up a start button from an srt10 pickup for my rt magnum
was wondering if anyone has got a schematic of the mags ignition switch/wiring
the button is going in the package cubby below the hvac control head
thanks in advsnce- roadpigl

I do not believe your idea will work the way you it to. The LX has to have the correct programed key in the ignition in order to start.

There is a thread within this forum with a link to the shop manual, maybe someone who has it will chime-in, it is on my office PC if you do not get an answer I will get something to you tomorrow.

**bipto** · 03-29-2006, 10:30 PM

Well... lookie what I found over here...

Starter button

**Fondy** · 03-29-2006, 10:34 PM

sweet hope it all works

and you better take pics when its done.

**roadpig** · 03-29-2006, 10:48 PM

thanks for the replies- ill be leaving the ignition cylinder alone- turn the key to on and then hit the button- for the wow factor- key will still be functional- thanks for the link to the button thread- but it would sure help to have a look at the shop manual- thanks for any assistance- roadpig

**gn300** · 03-30-2006, 07:41 PM

How much was the button dealer in canada here said $79 i think with no wires and fits the cigerette lighter hole!

Honda S2000 might be cheaper and come with wires.

**roadpig** · 03-30-2006, 11:05 PM

got the button for 43.00 shipped from make it mopar- just about finished mocking it up- will take pictures when done- roadpig

**saluki450** · 03-31-2006, 12:54 AM

Originally Posted by roadpig

got the button for 43.00 shipped from make it mopar- just about finished mocking it up- will take pictures when done- roadpig

I don't know if I'm misreading this post, but to me it sounds like..

"Guys, I know you'all want this as much as I do, so I'm going to forsake my weekend and lock myself in the garage. I guarantee that by Monday, April 3, 2006 I'll have it finished and working correctly, with pics and a how-to for the Knowledge Base. Thanks for your patience and see you soon. Love, Roadpig"

hehehe

Dan

**roadpig** · 03-31-2006, 09:10 AM

actually, i started this thread looking for some help with a schematic and/or
pinout chart of the mags ignition circuit- my last post was in respone to the one
above it- would you be able to help me saluk?- ill check back after i let
myself out of the garage- roadpig

**RandomAccess** · 03-31-2006, 09:18 AM

In case you didn't follow bipto's link... this should be what you need...

Originally Posted by fnkychkn

the ignition switch on LX actually consists of 4 switching devices;

1. key in switch (mux). hardwired to CCN

2. ignition switch position sense (mux). hardwired to CCN > bussed to PCM

3. ignition run/start.

4. ignition start only. hardwired through IPM to PCM

bypassing the start only circuit of the switch assembly would signal the PCM to ground the starter relay. however, someone would need to experiment to see if any other input to PCM is required.

pin 5 = B+ [light blue/red]

pin 4 = fused ign switch output (start) [pink/dark green]

**RandomAccess** · 03-31-2006, 09:19 AM

There is potential to this mod...

anyone see the transporter 2? How about one of those touch screens that won't let you start the card without a code...

**Super T** · 03-31-2006, 02:47 PM

I'd prefer just a number pad like in the first movie, but I agree, it'd be tight... and a whole lot harder to steal. Pretty sure that in order to get it to function well you'd have to add some relays and possibly a plc.... would be hella-cool though.

**roadpig** · 04-03-2006, 08:38 PM

thanks for the replies- i saw funkys chart of the ignition switch pins- hey funky-

if i read your post right- pin 5 is battery power(hot)- when you use the key to start- you are basically connecting pins 4 and 5- right? now with the start button- if i connect pin 2 on the srt button to 4 on the ignition switch- then all ill have to do is use pin 5 on the ignition switch to power the start button- or find a hot lead somewhere else-ive got a schematic of the srt switch that says pin 2 on the button is the same as pin 4 on the stock ignition switch- thanks roadpig