Figured id start a thread of my mods. I did 95% of my own work. Bought this magnum in april of 2011.
Could use a good detail.
06 Dodge Magnum R/T
Brilliant Black,demolded,debadged,Halos,Projector low beams,LED parking,brake,reverse,license plate lights. LED daytime running lamps.
Billet grille (upper and lower)
22inch staggered Status Knights black lip machine center
Tires Toyo Proxes 265/35 22 front 285/30 22 rear
Gray leather seats, black and gray trim
Kenwood DNX 8120 Navi head unit ipod,3.5mm aux and usb input
Infinity reference mids F 6x9 3ways R 6x9 2ways
sub 12 inch solo bariac custom built box into spare under sub floor hidden
4 channel amp for mids, 2 channel amp for sub
Viper 2way remote start alarm
Powerplant (built by Stu of Inertia Motorsports installed by me)
5.7 2011 cast iron block
Super spartan cam 112 LSA
6.1 timing and oil set
Inertia CNC ported and polished performance heads
Custom pushrods,180 stat, egr delete,SLP underdrive pulley,Frankentake CAI
Edge High Stall converter
CMR tuned by Stu
Engine Dressup (by A&M customs)
Orion silver valve covers,fuel rails and front accessories
Brilliant black shaved intake
Hotrod black coolant tank,abs cover,fuse box and strut covers
Shaved and smoothed engine cover brilliant black, charcoal and orion silver
JBA shorty headers, stock cats, JBA stainless cat back dual exhaust
Damn that's a lot of work for a car you've owned less than a year!
2006 Inferno Red Magnum RT - firstname.lastname@example.org at TMP DA 300 Sept 28, 2012,
SRT headers, Mopar CAI, Diablosport Trinity, Stant 180 deg thermostat, Inertia Spartan Cam, 6.1 chain tensioner, B&M transmission cooler, FTI 3200, MTCM, 392 swaybars F + R, Eibach Pro-kit, Magnaflow 3" catback w/ hi-flows, 6.1 heads and intake, 2012 3.91 Getrag, OST tuned, Joelvan rad, Brembos
To be installed: PS cooler and engine oil cooler
Beautiful engine cover! So beautiful, in fact, that I think you should hang it on the wall, in the garage.
Then we can all see that intake!!!
'08 Charger RT R&T •C&L •93 CAI tune •Jet 180 •SRT8 suspension •SLP LM1 •Magnaflow high flow mids •RTJunkie's NOESP •Silver Box •Vredestein 275/40/20's all around •BT Catch Can (BEE871 bracket) •Hood Struts •Blinker Mod •3GCustomz Half Covers & ABS Cover •Danko chin spoiler •OEM Hid w/ OEM Projectors •Demoulded, and partially debadged •Plasti-dip treatment
JBA SHORTIES ON A SHELF IN MY GARAGE MOD
KEEP CALM & CHIVE ON!
I'm in the Twilght Zone again!
I read your other thread AFTER I posted my previous comment, in which you stated:
"thanks everyone for you info i will be going with out the engine cover it does look good hanging on the garage wall though. But if my motor could look meaner and run cooler thats what im doing, going without it."
Just loaded a cmr tune by Johan so far so good i have all weekend off to play with it so i can send a data log back and hopefully get a few extra ponies out of her. i also plan on running it at the local 1/8th mile track to see what she can do.
went on and shaved the wiper, wrapped my console lid in black leather and did another bezel and painted it silver.
updated the dash with new switches got rid of the two toggle style switches on the side.
also modified the frankentake to go to the fender/bumper to be more of a true cold air intake. i also installed the blue top solenoids this past week.
PB 1/8th mile email@example.comMPH firstname.lastname@example.org
Sold my 22 inch staggered status knight wheels. Gonna change up the wheels and suspension. Put my stock wheels back on with some 245/55 r18 B F Goodrich. The plan is to install some coil overs and go with some 20 inch concave staggered wheels in a machine finish. Ive already gone thru 3 sets of rear tires on the 22's and nothing seemed to get grip. So maybe with a 20 inch wheel I'll have some more choices for tires and save on the weight. Heres a few pics of my car now.
Nice work you've done!
05 Magnum Mineral Grey RT Hemi Reg# 00310
well i did this a while ago but forgot to add it to this thread.
updating pics for interior upgrades. Led needles, led interior lights, nexus 7 tablet install custom bezel, and rearview mirror monitor.
Where did you get that mirror?
Sent from my iPhone 4s using Tapatalk