Page 1 of 3 123 LastLast
Results 1 to 15 of 35

Thread: It Here!!!

  1. #1
    needasrt4 is offline LX Padiwan
    Join Date
    Jun 2004
    Location
    Columbus, GA
    Posts
    440

    It Here!!!


    SPECIAL THANX TO WOODHOUSE DODGE & BILL PEMBERTON!!
    Our newest toy was pulled off the trailer last night at 10pm, wheels went on at 11pm, here's a pic of it this morning after we got it cleaned up.
    Tell me what you think.
    PS. Anyone looking, I have a set of RT Magnum wheels & tires with less than 50 miles on them in mint condition.

  2. #2
    DMAG's Avatar
    DMAG is offline Admiral of LXeus
    Join Date
    Feb 2004
    Location
    New Yawk
    Posts
    12,144
    Glad you got it! Only getting a red X though. :(
    Anthony
    Admin and Resident Website Fixer-upper


    Follow Me on Twitter! | Knowledge Base | Search | LXOM Winners | Link to LXForums

  3. #3
    BlackMagnum is offline LX Padiwan
    Join Date
    Apr 2004
    Posts
    378

    Here ya go

    You have to be an SRT Forum member to see that image....


  4. #4
    needasrt4 is offline LX Padiwan
    Join Date
    Jun 2004
    Location
    Columbus, GA
    Posts
    440
    thanx man, it was coming through fine on our end

  5. #5
    BlackMagnum is offline LX Padiwan
    Join Date
    Apr 2004
    Posts
    378
    So tell us about your wheels. Many of us don't know what options we have for aftermarket wheels. What were your options? How much?

  6. #6
    srt4geezer is offline LX Newbie
    Join Date
    May 2004
    Posts
    71
    Just saw this over on the SRT forum. Congrats. Wish mine was here. I went to the dealer & had them add the heated seats to the order. Well, they canceled my original ORDER & entered a new one to reflect the change. I am pissed. If I had known that is what they had to do, I would not have made the change.

  7. #7
    needasrt4 is offline LX Padiwan
    Join Date
    Jun 2004
    Location
    Columbus, GA
    Posts
    440
    we work for a wheel & tire shop so we got a good deal on them
    they are 22"X10" Limited 665 15et offset with Pirelli 265/35/22 Assymetrico
    the fit could not have been any better or any worse, they are perfectly flush front & rear with the fender flares, the tie rod end bolt is a hair FROM touching the tire but does not touch and you can't get your finger in between the back of the wheel/tire and the control arm but nothing touches when you turn the wheel or when you go over bumps, in essence, they fit like a glove but barely

  8. #8
    DMAG's Avatar
    DMAG is offline Admiral of LXeus
    Join Date
    Feb 2004
    Location
    New Yawk
    Posts
    12,144
    I keep hearing about this tie-rod issue. Seems odd they would position it so close to the wheel?
    Anthony
    Admin and Resident Website Fixer-upper


    Follow Me on Twitter! | Knowledge Base | Search | LXOM Winners | Link to LXForums

  9. #9
    needasrt4 is offline LX Padiwan
    Join Date
    Jun 2004
    Location
    Columbus, GA
    Posts
    440
    you just gotta be careful about what your doing, we had to ORDER the wheels without HAVING the car in hand yet and just took the best guess we could and we got extremely lucky.
    Stock tire is 8.85" wide and 28.6" tall
    We went 10.43" wide and 29.3" tall, this I believe is the absolute max you can go without heavy modifications.

  10. #10
    bigdaddyoc is offline Do work!
    Join Date
    May 2004
    Location
    Corona, California
    Posts
    1,238
    Now I'm wondering if my wheels are going to fit. I went the 20" route with 275/40/20. This tire size was almost an identical match(28.6 stock, 28.7 with the 20's) but width wise is where my concern is. Lets see...you went 265's on 10" wide..I went 275's on 9" wide....what do you think? Or wait..was it 9.5"..damn I forget now but I'm pretty sure its 9.5". Working in a wheel shop whats your opinion?
    '11 Charger RT Plus- Bright White
    22" II Crave wheels (USW's soon) LMI Hammer intake, 85mm BBK, Mopar Strut braces F&R, Corsa Sport exhaust. Trufiber CF hood, KW coilovers, BT underhood treatment, Custom engine bay covers/paint. Coming soon... ICE and a few more suprises from vendor R&D....

    RETIRED -'05 Black Magnum RT

  11. #11
    needasrt4 is offline LX Padiwan
    Join Date
    Jun 2004
    Location
    Columbus, GA
    Posts
    440
    its also gonna depend on your offset, as long as you are willing to use a spacer to bring it away FROM the control to keep FROM scrubbing your fine, we do it all the time and thought we were going to have to last night but its extremely close.
    2006 Charger
    414hp 421tq after Supercharger
    Heads, Cam, Intake waiting to install
    Still to come, NX, ESP Mod, Bigger Headers and Exhaust

  12. #12
    E55 KEV's Avatar
    E55 KEV is offline LX Padiwan
    Join Date
    Mar 2004
    Location
    Washington D.C.
    Posts
    894
    nice car and wheels needasrt4, I know that you will want to lower it when springs or kits are available. Do you think the 265 width tires will fit on a lowered car? I think that those using 265 and trying to use 275 tires up front will have to revert to maybe a 245 width when the car is lowered. Very few cars can go FROM a 225 OEM size to 265 and 275 without serious mods.
    • My Website - www.E55AMG.com
    • 2002 Mercedes-Benz E55 AMG
    • 2005 Dodge Magnum RT Hemi
    • 2005 Chrysler 300C Hemi

  13. #13
    needasrt4 is offline LX Padiwan
    Join Date
    Jun 2004
    Location
    Columbus, GA
    Posts
    440
    It sits perfect where it is right now, there is a 2 finger width fender gap between tire and fender on both front and rear and it does not sit any higher up off the ground than stock height so we are very happy with the results. If we do lower it, it will be bagged but we will have to go with a differnet setup in ORDER for the wheels to tuck for a clean drop.
    2006 Charger
    414hp 421tq after Supercharger
    Heads, Cam, Intake waiting to install
    Still to come, NX, ESP Mod, Bigger Headers and Exhaust

  14. #14
    smoove7410's Avatar
    smoove7410 is online now 2.0 x 3.0 x 5.0 ÷ 10.0 + 1.0 = 2.0²
    Join Date
    Apr 2004
    Location
    Los Angeles
    Posts
    3,457
    bag it!!! that would look awesome>

  15. #15
    bigdaddyoc is offline Do work!
    Join Date
    May 2004
    Location
    Corona, California
    Posts
    1,238
    The only reason I'm trying to go to the 275/40/20 is because of its match in size to stock. They don't make a 245/45/20 which would also be a near perfect match and going with the 245/40 is almost a 3/4" smaller diameter. I wasn't going with that size because I thought it needed the width.
    '11 Charger RT Plus- Bright White
    22" II Crave wheels (USW's soon) LMI Hammer intake, 85mm BBK, Mopar Strut braces F&R, Corsa Sport exhaust. Trufiber CF hood, KW coilovers, BT underhood treatment, Custom engine bay covers/paint. Coming soon... ICE and a few more suprises from vendor R&D....

    RETIRED -'05 Black Magnum RT

Page 1 of 3 123 LastLast

Share This Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •