LinkBack URL
About LinkBacksIs it possible to pop out that plastic covering the Chrysler Gold Ribbon in the wings? Long story short I went the cheap route on a custom badge (Decal) and am kicking my self for doing so. I'm wanting to atleast try and save my studpidity my removing the plastic piece and placing my decal underneath that so it'll look more "stock"
And yes I know I should have just gone with Billet Tech right from the get go.
Results 1 to 3 of 3
Thread: Removing the Gold Ribbon
-
03-01-2009, 06:33 PM #1
LX Newbie
- Join Date
- Feb 2009
- Location
- Spokane
- Posts
- 57
Removing the Gold Ribbon
Mods: 20" Devino Rims, GrillCraft Grill, 6000k HID Low Beams / Fogs, WeatherTech DigitalFit, Double Din Kenwood, LED Interior Lights, Tinted Windows, De Badged, AFE Stage 2
Coming Soon: Rear Curtains, Color Matched Pillars, DeMould, Halos, Dual Exhaust, 22Elite Console Cover
-
03-04-2009, 04:01 AM #2
Shoe Pimp Extraordinaire/ Realtor
- Join Date
- Sep 2008
- Location
- San Jose
- Posts
- 910
drill 4 or 5 small (SHALLOW) holes in the logo(one toward the top, bottom, right, left, and one in the middle. DONT GO TOO DEEP! then get a screw and screw it in one of the holes DONT SCREW IT IN TO FAST. as it goes in, the logo will split and crack. once the screw is in a bit and firm...grap it with a pair of vice grips or pliers and slowly but firmly pull the screw straight out. the pieces will come out. If you need to put the screw in another hole to get more out....do it. Once all the big pieces are out you should dremmel out any remaining glue n stuff.
It sounds odd, but its VERY simple and works great...I did it...
Aaron...Shoeboy"."
-
03-04-2009, 04:02 AM #3
Shoe Pimp Extraordinaire/ Realtor
- Join Date
- Sep 2008
- Location
- San Jose
- Posts
- 910
you want to salvage the plastic? Oh thats not gonna happen. That plastic is stuck to the logo...you should really just apply the decal OVER the logo
Reply With Quote
Posting Permissions
Share This Thread