LinkBack URL
About LinkBacks2005 300 Limited...
Just got new license plates today, required front in Colorado. I've taken my fascia off twice so I know what it looks like intimately, but I did not see the forest through the tree's until just now.
There's no front plate mount! (and I think a bolt-on would look terrible).
So doing searches on the forums have not shown me anything other than the hideaway from swifty. Anyone have any other ideas how to mount a front plate without trashing the great looking front I have?
bb
Results 1 to 7 of 7
-
02-05-2009, 12:39 PM #1
Jack of all trades, Expert at some.
- Join Date
- Dec 2008
- Location
- Colorado Springs (yes in Colorado)
- Posts
- 8
No front license plate mount - damn
-
02-05-2009, 12:50 PM #2
Resident Audio Head at 402 Motoring
- Join Date
- Apr 2007
- Posts
- 223
You could try suction cups behind the mount or magnets. If you use magnets you'll have to epoxy a piece of sheetmetal on the backside of the bumper where you want to stick the mount.
We sell custom wheels! Please ask me before you buy from someone else! Call 1-877-BLING - IT
402 Motoring Audio Department now open!
Most Brands of Head units, Nav systems, speakers, subs, amps. We'll beat Crutchfield pricing!!
Click here to see my work:
http://s24.photobucket.com/albums/c4...y/402%20Audio/
Please visit our Website
www.402Motoring.com
-
02-05-2009, 12:55 PM #3
Yes, I am a Supporting Vendor
- Join Date
- Sep 2005
- Location
- AuSable Forks,NY/Lorain Oh
- Posts
- 29,516
I just went through this......I gave up and mounted the plate.....the ticket just isn't worth it.Oh yeah......if you pick up a small bracket from Autozone it looks 1000x better than that POS that the factory uses.The small bracket will fit between the grill and lower opening without blocking either.
BFNY PERFORMANCE
Specializing in helping you effectively void your warranty!
Cam/Head Installs,Motor Installs,Suspension,Axles and Exhaust at reasonable prices ,Intake Machined,PM or Email bfnyperfomance@yahoo.com
PARAMOUNT HTCNag1,Flexplate,Converter,3.73 8.8 and Driveshaft,ARRINGTON 426 ,PWR Apache Heads,Billet Tech Covers,CTP Twins ,HHP parts support.Grille by DodgeMagnumGrille.com 10.67@126.78
RIP My Friend
-
02-05-2009, 01:07 PM #4
...
- Join Date
- Feb 2007
- Location
- Omaha, NE
- Posts
- 7,765
Originally Posted by Hemi31
did you ever take a picture of this erik??-Ryan
<<<clicky...
'93 1500 SB - 226k, '05 Magnum RT - 17k, '80 El Camino - 84k
-
02-05-2009, 04:49 PM #5
Jack of all trades, Expert at some.
- Join Date
- Dec 2008
- Location
- Colorado Springs (yes in Colorado)
- Posts
- 8
I did find a stainless stand-off that looks to mold around the V point in the middle and slope back for a flush fit, $65 bucks, I might go that route if I can't find anything else. I'm going to crush it anyway on the first high-curb I whack or pull it off when I back up - LOL. Looks like the fascia has been pulled off like that before. My Sebring was the worst being so low. I bought it used and the fascia was totally ripped off and hanging. After a few repairs with the plastic pop rivets I ended up bolting that sucker on.
Or I might wait for the ticket and then do something about the plate mount later.
-
02-05-2009, 06:59 PM #6
JT
- Join Date
- Mar 2008
- Location
- Geneva, Ohio
- Posts
- 1,359
same as hemi31, just went ahead and did it. if i move somewhere that dosent require it i will just weld up the plastic and paint.
-
02-05-2009, 09:43 PM #7
2.0 x 3.0 x 5.0 ÷ 10.0 + 1.0 = 2.0²
- Join Date
- Apr 2004
- Location
- Los Angeles
- Posts
- 3,461
Who was it that made the removable one that snapped on and off? I want one like that.
Reply With Quote
Posting Permissions
Share This Thread