I am looking for a 06 5.7 pcm out of a magnum, charger or 300...
Spartan Max cam, Indy maxx Heads milled 20, 6.1 push rods, AFE stage II cai, Jba titanium coated shorties, Jba Hi-flow cats, Mds light, Billit Tech catch can, Predator, Mopar TCM, Zoomers exhaust, BB Stage II Valve Body, Protorque 3500 converter, 2010 3.06 215mm diff, 2010 axles and hubs, Tranzformer shift Improver, Mygig ReR W/backup camera, CMR tuned by Diablotoona 345hp 365 tq. Hemi Registry #1164
Bump.
Why cant he get someone with a star scan to do it?His local tuner has one.
That is interesting can anyone verify this that a star scan cannot be used to change a vin number on a pcm...
not true..
you can set any PCM... I have 3 for my car, all Cleveland Pick a Part bought and I set them all with my star scan..
mated my VIN and WCM to them no issue..
did it for Intimidator as well when he put the 6.1L in his 2.7L car.. used the 6.1L PCM and we mated to his 2.7L WCM and keys..
not a big deal, the Change PCM option is in the WCM module options screen, but you have to have the PIN for your car to do it.
"Scars heal... glory fades, and all we're left with are the memories made, Pain hurts, but only for a minute, Yeah life is short so go on and live it; Cause the chicks dig it" - Chris Cagle
Cleveland Pick a part doesnt sell pcm's only with engine package...WTF![]()
need to take your ownership papers to the dealer, and ID, they have to provide the PIN for you if you request it.
maybe not now, they did 2 years ago..
I got one because Superchips didn't work with my original PCM, then I got one so I could swap out for dealer trips without dealing with reseting the Diablo.
last one I got was supposed to be for a 2006 so I could use a 2006 plus SRT cluster, as the hardware changed in 2006 (from my early build 2005) and 2006 plus SRT clusters (with 0-60 timers) don't work in 2005 cars..
only the one I got wasn't from a 2006 build 2006 car.. it was from a 2005 build, so it still doesn't work.. So like you I am looking for a 2006 5.7L PCM as well
Mr. I can you tell me what part number I might be looking for and if it is the same with a srt 6.1 or 5.7 thanx
no the 5.7L and 6.1L are different..
2006 part numbers for 5.7L
charger:
Daytona: (142mph Speed limiter)
04606839AC
04606839AD
05094680AA
05094680AB
05094680AC
05094680AD
05094680AE
05094680AF
05094680AG
05094680AH
05094680AI
05094680AJ
non-Daytona: (125mph speed limiter)
04606839AC
04606839AD
05094779AA
05094779AB
05094779AC
05094779AD
05094779AE
05094779AF
05094779AG
05094779AH
05094779AI
05094779AJ
300/magnum: (125mph speed limiter)
04606839AC
04606839AD
04896568AA
04896568AB
04896568AC
04896568AD
04896568AE
04896568AF
04896568AG
04896568AH
04896568AI
04896568AJ
You might also give Dave at B&G a call...
586-758-2003
He might just have what ya need
according to www.moparpartz.com
4896568AJ was replaced with 4606839AD (latest build) and is $294 on their site..
drawback is that it is a new PCM, so has no codeblock built to it, so you need a starscan, your VIN and PIN to build it, then you have to resend the Vehicle Config to it from dealerconnect or techauthority I believe, so the PCM has to be in the car, and the star scan connected to the internet..
this is going in a 05 5.7 magnum so I can use any of the part numbers under that colum or can I use any from any of the other cars also.


Share This Thread