Well in a recent thread someone said that PI just bends the stock fins to create the stall in their converts, I'm just here to state the facts about really goes on insided teh PI converters and how unique they really are.
1. PI uses a 245 style core, the only company to offer this, so we can offer more than 25 different setups for any combination that our customers need or desire.
1. PI torque converters can be equipped with STR as high as 2.53:1, an impossibility using a stock Mercedes torque converter core which all of our competitors use.
2. PI offers an unconditional warranty and free stall change for 2 years.
3. PI Mercedes torque converters have custom made parts and only reuse 1 part from the original torque converter while our competitors just modify the stock converter and charge high prices as if it was something special.
PI also uses a different cover for each stall, There is no way to bend that. You can look at the marks int eh cover and the angles of them tell the whole story. Each converter is built per specs of the car, weight/tq desired stall speed. So ever cover is going to be differnt for different cars. Hence, a 3k stall converter for a twin crew car making 600ft/lbs would only be around 2500 stall in a stock r/t the same weight.
Just thought I may clear the air sence some recent posts reflect very wrong infomation
4k stall cover
3k stall cover
Last edited by PWR_Justin; 04-27-2010 at 04:52 PM.
uhm.....playing devils advocate here, I don't think PI was specifically referred to or even implied in that post.
PARAMOUNT HTCNag1,Flexplate,Converter,3.73 8.8 and Driveshaft,PWR 462 ,PWR Apache Heads,Billet Tech Covers,CTP Twins ,HHP parts support.Grille by DodgeMagnumGrille.com email@example.com so far.
Got a shot of the guts? That would bury any doubt...
Hemi Registry 0436 6.1 block - CTP Dual intake - Modern Muscle ported intake manifold - Indy Heads - PWR cam - FTI converter - TTI Longtube(catless) - 3.06 gears - 17 X 8.5 Borbet TS w/ 275/40 Hoosiers - Diablo tuned!! Billet Tech Goodies EVERYWHERE. ALL Parts supplied by LXF vendors: Afterhours Mopar Performance, SpeedRated, PWR, Modern Muscle, Picklefork...and LXForum members. Installed by: Afterhours Mopar Performance
We had that 4k stall opened up a few weeks back to get tighted up a little by a local company PTC I'll check and see if anyone took some. If not I will ask PI for some when they redo my stall.
Why the different colors?Does that represent the stall??
The main difference is the angle of the imprints on the front cover. Which you can see are a lot more slanted on the 4k vs 3k stall. This isn't something you can "bend" its a different part for each stall.
THE DIGITAL MILLENNIUM COPYRIGHT ACT OF 1998
yep the tuning is here.
It's all so clear now.
Shiny paint, big wheels, powerful engine.
My HEMI YouTube channel.
I believe those dimples are for anti-ballooning... or distortion of the outer cover under pressure.
12.869 @ 102.02 Stock 5.7 w/ C&L, Predator, JBA Cats, Volant catback, 3.06 Getrag, DRs & skinnies